Introduction About this manual Thanks for your order about our 3” mobile barcode label printer. This manual can help you learn how to use this product. Please read this manual carefully before using it and keep it for future reference. International conventions For your convenience, this manual uses the following symbols (icons) and conventions:...
Safety instructions Observe the following precautions when using the printer Attention Do not disassemble the printer yourself, please read this manual carefully before using Warning Turn off the power immediately after a fault. When you find the printer or charger smoke or smell, please unplug the charger and remove the battery, be careful to avoid being burned.
Page 5
Attention The printer could work stably from 0°C to 40°C, but the higher or lower temperature would debase the print quality. Attention The storage time of receipts should be related to quality of the thermal paper. If the user needs to print the long-term preservation receipt, please use long-acting thermal paper.
Page 6
Attention Keep the battery in a safe place out of the reach of children in case of danger. Attention Once the battery discoloration or deformation etc., please stop using immediately. Attention When Using Battery Charger Attention Before use, please read this manual and charger surface marks.
3.2 Printing paper roll installation 1. Take down the sealing tape on printing paper roll; 2. Press cover-open button and open paper tank; 3. Put paper roll into paper tank; 4. Pull out a length of paper along with paper-out opening. Remark: 1.
Battery charge Standby charge Plug power adapter into power outlet and plug USB interface into the printer Charging Port:AC:110V~240V(50/60Hz) Charging: Battery indication symbol battery status bar scrolling displays. Charging complete: The icon indicate the battery is fully charged, the buzzer will the sound alarm. Warning If use power adapter that is not provided or accepted by our company, it may damage printer.
4. Use function 4.1 Basic features Power on: Keep pressing power button for 3 seconds. Power off: Keep pressing printer power button during starting up, then printer closes. Paper feeding: Press the feed button(Under the continuation paper model then paper feed for 5mm. press paper feed button in label / black label model, paper feeding to label gap or black label).
Page 13
Print Info Press power key to print self testing page Set wide range resolution (Coarse adjustment) Setting small range resolution (fine adjustment) print speed Setting Chinese/English Language Setting Open/Close Beeping on/off Gap/Mark/None Paper Types Setting Open/Close Set whether to turn on the paper Open/Close Set whether to turn on the paper 10/30/60/99...
4.3 Self Testing The print self-test page has the details of the printer and Communication interface configuration, etc. Product Parameters Selftest Firmware Version: A43B1C3D1F0_V1.11 2018-11-02 Model:........Mobile printer Interface:......USB & BlueTooth Code Page:......GBK Print Method:....Direct Thermal Print Quality:......2 Print Density::....2 Print Speed:......4 Font:........24x24GB 18030汉字字库...
Page 15
Bluetooth Parameters [BlueTooth Configure] EDR NAME:....Mobile printer-5BC1 EDR PIN:......0000 EDR ADDR:....DC-0D-30-0F-5B-C1 BLE ADDR:....DC-0D-30-0F-5B-C1 BT Ver:......5.7.7,FSC-BT826 Bluetooth information can setup by setting tool, the details pls check <Setting tool manual>...
Icons Introduction Print Status The icon display at screen when printing. Paper End The icon display at screen when paper ending or wrong paper install. Insert Paper Cover The icon display at screen when cover open or Close Cover Opening closed in wrong operation.
6. Communication 6.1 USB Communication 3"moboile label printer applies Micro USB interface, if connected to PC as blew, can perform operations such as charging, setting and transmitting data.
6.2 Bluetooth communication 3'Mobile Label Printer has both models Bluetooth 4.0 (SPP+BLE) ,it can communicate with iPhone, iPad, Android. The effective communication distance is less than or equal to 10 meters. It support for AirSync protocol and can use Bluetooth function on the Wechat platform. Bluetooth default pairing password: 0000, it can be setting up with parameter settings.
7. Maintenance 7.1 Printer daily maintenance 1. Clean printer exterior and paper tank: please scrub printer surface and paper tank interior slightly with wringed wet cloth. Pay attention to that wet cloth must be wringed out completely. 2. Clean printer mechanism: printer mechanism must be cleaned regularly, especially when printing quality decrease.
8. Fault diagnosis Fault phenomenon Fault reason Solution Printer only feeds Change printing Printing paper is paper during printing, paper installation and has no printing installed upside down. direction. data. Printer movement is polluted due to Movement needs to long-term not being be cleaned.
9.2 Battery cycling This product adopts Li-on rechargeable battery. In order to protect environment, please don't dispose waste battery at will .Supplier will provide battery recycling service for you. Building 1, Lane.555, Huan ke Rd., zhangjiang Hi-tech Park, Pudong New Area, Shanghai, P.R.C PostNumber: 201203 www.honeywellaidc.com...