Page 1
FIXED IR DOME CAMERA TK‐T2100RU INSTRUCTIONS TK‐T2100RE For Customer Use: Thank you for purchasing this product. Enter below the Model No. which is located on Before operating this unit, please read the body. the instructions carefully to ensure the Retain this information for future best possible performance reference. Model No.___________ Serial No. LST1442‐001A...
Page 2
Important Safety Information Installation and serving should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty. • To reduce the risk of fire or electric shock, do not expose the product to rain or moisture. WARNING! Power Supply • This dome camera can operate on DC12V only. • Connect only one camera to the power line, DC12V. Do not share the power line with other equipment.
Table of Contents Operating Notes.............................. 4 1. Product overview ............................5 1.1 Before You Begin ............................ 5 1.2 Unpack everything............................ 5 1.3 Physical Characteristics .......................... 5 1.4 Routine Maintenance .......................... 6 2. Installation and Connection ........................7 2.1 Disassembling the Camera ........................ 7 2.2 Connecting the Wiring .......................... 7 2.3 Mounting the Camera .......................... 8 2.4 Adjusting the Camera Position ........................ 9...
Operating Notes Operating Conditions This camera has been designed for indoor use. It cannot be used outdoors. Avoid viewing very bright objects (example, light fixtures) for extended periods. Avoid operating or storing the unit in the following locations: ...
FIXED IR DOME CAMERA INSTRUCTIONS SAFETY PRECAUTIONS WARRANTY CARD (Only for TK-T2100RU) TEMPLATE SCREW (x2) and SCREW ANCHOR (x2) If any parts are missing or damaged, contact the dealer you purchased the camera from. 1.3 Physical Characteristics 1.3 TK-T2100RU, TK-T2100RE 1/2...
1.3 TK-T2100RU, TK-T2100RE 2/2 IGURE 1-1: P ABLE ICTORIAL NDEX EFINITION Index # Description Conduit hole: Used for surface runs power/video connector Bottom case Camera housing Dome cover IR board Video Output Terminal DC 12V Power Connector: Make sure to connect the power connector to correct ports (Red+/Black–).
2. Installation and Connection 2.1 Disassembling the Camera Before you mount and adjust the camera, follow these steps to disassemble the camera. 1. Insert a coin or flat tool to the side hole and twist to remove the dome cover. 2.
2.3 Mounting the Camera Attach the mounting template to the wall or ceiling. ① Drill two holes, then insert the screw anchors into the holes. ②. Secure the bottom case to the wall or ceiling with the TP4 x 15 mm tapping screws supplied Recommendation: ③...
2.4 Adjusting the Camera Position The dome camera has th ree axes for positioning the camera. While monitoring the picture on the monitor, adjust the camera position as follows: Pan Adjustment: Rotate 3D assembly in the base. Do not turn assembly more than ±177°as this may cause the internal cables to twist and disconnect or break.
2.5 Completing the Installation On ce all adjustments are done, attach and secure the camera housing: 1. Use a soft, lint-free cloth to wipe the dome cover clean and remove fingerprints. 2. Assemble the dome cover and the bottom case 1.
Specifications Specifications Model Fixed IR dome Camera Model Name TK-T2100RU TK-T2100RE Video System NTSC PAL Image System / IC Image Device 1/3" type IT-CCD Pixel Elements Effective pixels: 768 (H) × 494 (V) Effective pixels: 752 (H) × 582 (V) Total pixels: 811 (H) ×...