Panasonic SA-HT530GCP Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Home Theater System
  5. SA-HT530GCP
  6. Service manual
Panasonic SA-HT530GCP Service Manual

Panasonic SA-HT530GCP Service Manual

Dvd home theater sound system, silver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Specification
n Amplifier Section
RMS Output Power: Dolby Digital Mode
Front Ch
55 W per channel (6 Ω), 1 kHz, 10% THD
Surround Ch
55 W per channel (6 Ω), 1 kHz, 10% THD
Center Ch
160 W per channel (6 Ω), 1 kHz, 10% THD
Subwoofer Ch
220 W per channel (4 Ω), 100 Hz, 10% THD
Total RMS Dolby Digital Mode Power
DIN Output Power: Dolby Digital Mode
Front Ch
Surround Ch
Center Ch
120 W per channel (6 Ω), 1 kHz, 1% THD
Subwoofer Ch
150 W per channel (4Ω), 100 Hz, 1% THD
Total DIN Dolby Digital Mode Power
n FM/AM Tuner, Terminals Section
Preset station
Frequency Modulation (FM)
Frequency Range
40 W per channel (6 Ω), 1 kHz, 1% THD
40 W per channel (6 Ω), 1 kHz, 1% THD
FM 15 stations
AM/MW 15 stations
87.50-108.00 MHz (50-kHz step)
DVD Home Theater Sound System
SA-HT530GCP
Colour
(S)...Silver Type
Sensitivity
S/N 26 dB
Antenna terminals
Amplitude Modulation (AM/MW)
Frequency Range
AM Sensitivity S/N 20 dB at 999 kHz
Phone Jack
Terminal
Mic Jack
600 W
Sensitivity
Terminal
n Disc Section
Disc played [8 cm or 12 cm]
1. DVD-RAM (DVD-VR compatible, JPEG formatted disc)
2. DVD-Audio
3. DVD-Video
4. DVD-R, DVD-RW (DVD-Video compatible) + R, + RW (Video
compatible)
5. CD-Audio (CD-DA)
6. Video CD
430 W
7. SVCD (Conforming to IEC62107)
8. CD-R/RW (CD-DA, Video-CD, SVCD, MP3, WMA, JPEG formatted
disc)
9. MP3/WMA*1
© 2005 Matsushita Electric Industrial Co. Ltd.. All
rights
distribution is a violation of law.
ORDER NO. MD0503084C3
75 Ω (unbalanced)
522-1629 kHz (9-kHz step)
520-1630 kHz (10-kHz step)
Stereo, 3.5 mm jack
Mono, 6.3 mm jack (2 systems)
reserved.
Unauthorized
2.5 µV (IHF)
2.2 µV
560 µV/m
0.7 mV, 1.2 kΩ
copying
and

Advertisement

Table of Contents
loading

Related Manuals for Panasonic SA-HT530GCP

Summary of Contents for Panasonic SA-HT530GCP

  • Page 1 ORDER NO. MD0503084C3 DVD Home Theater Sound System SA-HT530GCP Colour (S)...Silver Type Specification n Amplifier Section Sensitivity 2.5 µV (IHF) RMS Output Power: Dolby Digital Mode S/N 26 dB 2.2 µV 75 Ω (unbalanced) Front Ch Antenna terminals 55 W per channel (6 Ω), 1 kHz, 10% THD...

  • Page 2: Table Of Contents

    SA-HT530GCP · Compatible compression rate: output level 0.7 Vp-p (75 Ω) 0.7 Vp-p (75 Ω) MP3: between 32 kbps and 320 kbps output level WMA: between 48 kbps and 320 kbps Terminal 10. JPEG*1 Pin jack (Y: green, P : blue, P : red) (1 system) ·...

  • Page 3: Before Use

    SA-HT530GCP 14.2. Cautions to Be Taken During Replacement of Optical 18.2. Checking the Main P.C.B., Panel P.C.B., MIC P.C.B. and Pickup and Spindle Motor Headphone P.C.B. 15 Self-Diagnosis Function 19 Adjustment Procedure 15.1. Automatic Displayed Error Codes 19.1. Required Tools and Equipment 15.2.

  • Page 4: Use Of Active Subwoofer

    SA-HT530GCP 2 Use of Active Subwoofer 2.1. Checking Main Unit when Active Subwoofer is Used...

  • Page 5: Checking Main Unit Using Power Jig

    SA-HT530GCP 2.2. Checking Main Unit Using Power Jig If the active subwoofer is not available during time of repair to the unit, the following equipment could be used. Jig product number RFKZ0182 (110V , 127V, 220V, 230V - 240V for with voltage selector overseas domestic use).

  • Page 6: Handling The Lead Solder

    SA-HT530GCP 4.1.2. LEAKAGE CURRENT HOT CHECK (See Figure 1.) 1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check. 2. Connect a 1.5kΩ, 10 watts resistor, in parallel with a 0.15µF capacitor, between each exposed metallic part on the set and a good earth ground such as a water pipe, as shown in Figure 1.

  • Page 7: Prevention Of Electro Static Discharge (Esd) To Electrostatically Sensitive (Es) Devices

    SA-HT530GCP 7 Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip”...

  • Page 8: Cautions To Be Taken When Handling Optical Pickup

    SA-HT530GCP 8 Cautions to Be Taken When Handling Optical Pickup · The laser diode used inside the optical pickup could be destroyed due to static electricity (potential difference is caused by electrostatic load discharged from clothes and human body). Handle the parts carefully to avoid electrostatic destruction during repair &...

  • Page 9: Cautions To Be Taken During Replacement Of Optical Pickup

    SA-HT530GCP 8.2. Cautions to Be Taken During Replacement of Optical Pickup Supplied optical pickup is equipped with a short clip found at the end of flexible cable in order to prevent electrostatic destruction of laser diode. Before connection, remove the short clip, and check that the short land is opened (remove solder if the part is short- circuited).

  • Page 10: Precaution Of Laser Diode

    SA-HT530GCP 9 Precaution of Laser Diode CAUTION : This product utilizers a class 1 laser. Invisible laser radiation is emitted from the optical pick up lens. When the unit is turned on: Wavelenght : 662nm/785nm Maximum output radiation power from pick up : 100µW/VDE 1.

  • Page 11: Accessories

    SA-HT530GCP 10 Accessories AC cord FM indoor antenna AM loop antenna Video cable Remote control System cable Antenna plug adapter...

  • Page 12: Remote Control Reference

    SA-HT530GCP 11 Remote Control Reference...

  • Page 13: Disc Information

    SA-HT530GCP 12 Disc information...
  • Page 14 SA-HT530GCP...
  • Page 15 SA-HT530GCP...
  • Page 16 SA-HT530GCP...

  • Page 17: About Highmat

    SA-HT530GCP 13 About HighMAT 13.1. What’s HighMAT? Consumers worldwide are using PCs to create their own collections of music, photos and even video by burning them onto CDs. But how these collections can be experienced across different devices can be confusing to navigate, time consuming to access for a DVD player, and be incomplete in terms of music information available to the customer.

  • Page 18: Why Take Advantage Of Highmat

    SA-HT530GCP 13.2. Why take advantage of HighMat? A Problem Defined:Today, when consumers create their own digital audio, video or photo collections on CD-R or other physical formats, there are numerous, inconsistent ways that devices read the data. For the consumer, the playback experience can be...
  • Page 19 SA-HT530GCP Conventional HighMat...
  • Page 20 SA-HT530GCP HighMAT is now available for CD Burning and in Leading DVD Players.HighMAT is a new technology that is now available in leading software and consumer electronic devices to dramatically improve the digital media experience when you create homemade CDs.

  • Page 21: Optical Pickup Self-Diagnosis And Replacement Procedure

    SA-HT530GCP 14 Optical Pickup Self-Diagnosis and Replacement Procedure 14.1. Self-diagnosis This unit is equipped with the optical pickup self-diagnosis function and the tilt adjustment check function. Follow the procedure described below during repair in order to perform self-diagnosis and tilt adjustment effectively. Especially when “NO DISC” is displayed, be sure to apply the self-diagnosis function before replacing with an optical pickup.

  • Page 22: Cautions To Be Taken During Replacement Of Optical Pickup And Spindle Motor

    SA-HT530GCP 14.2. Cautions to Be Taken During Replacement of Optical Pickup and Spindle Motor Before replacing the optical pickup and spindle motor, check the total usage time respectively. Follow the checking method described as below. Item Status and Key Function...

  • Page 23: Self-Diagnosis Function

    SA-HT530GCP 15 Self-Diagnosis Function 15.2. Memorized Error Codes This unit is equipped with the self-diagnosis function, which displays an error when it occurs, for use during servicing. 15.2.1. Activating Self-Diagnosis Function 15.1. Automatic Displayed Error and Displaying Method Codes 1. Turn on the power.

  • Page 24: Service Mode Table

    SA-HT530GCP 15.3. Service Mode Table 1 Following modes are available with combinations of the pressed buttons on the player and on the remote controller unit. Player Remote controller Usage unit Error code display (Refer to the item, 15.4. DVD Error Code Description)

  • Page 25: Mode Table

    SA-HT530GCP 15.5. Mode Table 2 Following modes are available with combinations of the pressed buttons on the player and on the remote controller unit. Item Operational Condition Details Display To Exit Mode and Key Function Jitter display While the player is...
  • Page 26 SA-HT530GCP Item Operational Condition Details Display To Exit Mode and Key Function User initialization While the player is User initialization “INITIALIZED” None stopped and no disc is The user setting recovers the factory inserted, press setting. hold down button on the player...

  • Page 27: Lock Function

    SA-HT530GCP 15.6. Lock Function This function prohibits removal of disc and some disc operations to prevent loss of disc at a shop during sales promotion or equivalent occasions. While this function is activated, the player displays “___LOCKED_” if any button is touched.

  • Page 28: Service Precautions

    SA-HT530GCP 16 Service precautions 16.1. Recovery after the player is repaired · When FLASH ROM IC or DVD Module P.C.B. is replaced, carry out the recovery processing to optimize the drive. Playback the recovery disc to process the recovery automatically.
  • Page 29 SA-HT530GCP b. If NO is selected, only the recovery process is applied. 5. a. When the version upgrade process is complete, a message of completion appears on the screen. Remove the disc. b. Follow the instruction appearing on the screen, and remove the disc.

  • Page 30: Disassembly And Main Component Replacement Procedures

    SA-HT530GCP 17 Disassembly and Main Component Replacement Procedures “ATTENTION SERVICER” Some chassis components may have sharp edges. Be careful when disassembling and servicing. 1. This section describes procedures for checking the operation of the major printed circuit boards and replacing the main components.

  • Page 31: Locations

    SA-HT530GCP 17.2. P.C.B. Locations...

  • Page 32: Disassembly Of Top Cabinet

    SA-HT530GCP 17.3. Disassembly of Top Cabinet Step 1: Remove 4 screws. Step 3: Lift the top cabinet upwards and push in backward. Step 2: Remove 3 screws at rear panel. 17.4. Disassembly of Front Panel Unit · Follow the (Step 1) - (Step 3) of item 17.3 - Disassembly of Top Cabinet Step 1: Remove lid.

  • Page 33: Disassembly Of Panel P.c.b., Headphone P.c.b. & Mic

    SA-HT530GCP Step 5: Draw front panel unit forward. · Note: Avoid pulling the front panel unit using strong force. This may cause damage to Main P.C.B. due to abrasion between metal bracket and the mechanism unit. 17.5. Disassembly of Panel P.C.B., Headphone P.C.B. & MIC P.C.B.

  • Page 34: Disassembly Of Cd/ Dvd Mechanism

    SA-HT530GCP Front Panel Unit Step 1: Detach 50P FFC Boards (CN2004). Step 2: Detach connector (H2000). 17.7. Disassembly of CD/ DVD Mechanism · Follow the (Step 1) - (Step 3) of item 17.3 - Disassembly of Step 3: Remove 2 screws.
  • Page 35 SA-HT530GCP Step 7: Detach 20P FFC Board (FP8501). 17.8.2. Replacement of Tray. · Follow the (Step 1) - (Step 7) of item 17.8.1 - Replacement of Traverse Unit Step 1: While pressing the stopper to the arrow direction, slide the guide tray unit to remove.
  • Page 36 SA-HT530GCP Step 3: Latch Drive Arm Catch onto Tray and Tray Slider. Step 4: Push Tray . Step 5: Check Tray and Drive Arm move smoothly. 17.8.3. Disassembly of loading section. · Follow the (Step 1) - (Step 4) of item 17.8.1 - Replacement of Traverse Unit...
  • Page 37 SA-HT530GCP 17.8.4. Replacement of Optical Pickup Unit · Follow the (Step 1) - (Step 5) of item 17.8.1 - Replacement of Traverse Unit · Follow the (Step 1) - (Step 5) of item 17.8.2 - Replacement of Tray Step 1: Widen the catch, push the pin in.
  • Page 38 SA-HT530GCP Note: Insert a short pin into FFC of the optical pickup. Step 2: Remove 4 pins. Step 3: Remove Traverse Unit.
  • Page 39 SA-HT530GCP...
  • Page 40 SA-HT530GCP 17.8.5. Disassembly of traverse motor (Unit) and spindle motor (Unit). · Follow the (Step 1) - (Step 5) of item 17.8.1 - Replacement of Traverse Unit · Follow the (Step 1) - (Step 5) of item 17.8.2 - Replacement of Tray...
  • Page 41 SA-HT530GCP...

  • Page 42: Service Position

    SA-HT530GCP 18 Service Position 18.1. Checking the Main P.C.B. Below are the neccessary steps required for checking of Main P.C.B.. 1. Disassembly of Top Cabinet. 2. Disassembly of Front Panel. 3. Disassembly of Rear Panel. 4. Disassembly of Main P.C.B..

  • Page 43: Checking The Main P.c.b., Panel P.c.b., Mic P.c.b. And Headphone P.c.b

    SA-HT530GCP 18.2. Checking the Main P.C.B., Panel P.C.B., MIC P.C.B. and Headphone P.C.B. Below are the neccessary steps required for cheking of Panel and Headphone P.C.B.. 1. Remove Top Cabinet. 2. Disassembly of Front Panel. 3. Disassembly of Headphone P.C.B., MIC P.C.B. and Panel P.C.B..

  • Page 44: Adjustment Procedure

    SA-HT530GCP 19 Adjustment Procedure 19.1. Required Tools and Equipment 19.1.1. Usage Equipment Application Name Number Tilt adjustment DVD test disc DVDT-S20 [SPG] TORX screw driver (T6) Available on sales route. (T6) or RFKZ0185 [SPG] Others Hanari VFK1784 Grease RFKXPG641 [SPG]...
  • Page 45 SA-HT530GCP 19.1.4. Optical Adjustment (Optical Pickup Tilt Adjustment) Measurement point Adjustment point Mode Disc Tangential adjustment screw T1 (inner track) replay DVDT-S20 [SPG] Tilt adjustment screw T43 (outer track) replay Measuring equipment Adjustment value None (LCD display of the player is used.) Adjust that jitter value becomes minimum.

  • Page 46: Block Diagram

    SA-HT530GCP 20 Block Diagram OPTICAL PICKUP LD(DVD) SPINDLE MOTOR UNIT LD(CD) Q8552 Q8562 SWITCH SWITCH BIAS IC8251 C0GBG0000048 OPIN+ MOTOR DRIVE LDIN BIAS2 TRIN Q8551 Q8561 SWITCH SWITCH QR8571 SUPPLY CONTROL SWITCH 130 134 129 133 127 110 111 132 131 136 115 135 114 137 116 138 117 DV2.1 LSI...
  • Page 47 SA-HT530GCP Q8550 SWITCH Q8560 SWITCH IC8601 C0EBE0000384 D8550 VOLTAGE DETECTOR IC8051 IC8651 C3ABPG000133 XRESET RFKWMH82B160 64 SDRAM IC 16M FLASH ROM IC Q8607 SWITCH 2,4,5,7,8,10,11, 22-26, 9,10,16,17,48 1-8,18-25 29-36, 13,42,44,45,47, 29-35 38-45 Q8606 48,50,51,53 SWITCH IC8606 C0EBA0000031 RESET IC 1,2,4,5,7,8,10,...
  • Page 48 SA-HT530GCP TO MAIN BLOCK 16(20) 14(13) 12(11) QR8111, QR8112 IC8111 C0CBCBD00018 SWITCH POWER SUPPLY IC8421 C0FBBK000050 AUDIO DAC 45-47 IC8695 IC8691 C0JBAA000346 C0JBAA000346 AND GATE AND GATE LOGIC IC LOGIC IC QR8420 MUTING SWITCH 174-176 149 151 152 156 158 DV2.1 LSI...
  • Page 49 SA-HT530GCP CR_R CRIN CYOUT CB_B CBOUT CBIN CROUT CYIN IC2006 JK2001 C9ZB00000466 VIDEO VIDEO VOUT SELECTOR IC YOUT S-VIDEO COUT RM902 IC904 C0GAH0000002 RELFECTIVE PHOTO SENSOR Q2004 SWITCH IC2019 C3EBEG000072 Q2030 EEPROM IC (NOT SUPPLIED) SWITCH S901 S902 PLAY OPEN...
  • Page 50 SA-HT530GCP VINSUB 52(50) GOUTFL(R) 51(49) DVD_MIXL(R) VINFL(R) 69(70) INE1(2) GOUTSUB DVDCNT INCA SUBW INSUBA 41(38) FOUT4(3) DVDSL(R) 78(79) INLSA(R) 25(23) IC2010 OUTLS(R) C0ABBB000118 24(22) DUAL OP OUTLSN(R) IC2011 C1BB00000845 IC2015 DVDFL(R) ASP IC 5(3) C0ABBB000118 7(1) 75(76) INFLA(R) DUAL OP AMP...
  • Page 51 SA-HT530GCP JK2000 TO ACTIVE SUBWOOFER BLOCK SUB+B SUB+B FRONTL(R) SUBAC1 SUBAC1 DVDAC1 SURR L(R) SUBAC2 SUBAC2 DVDAC2 FL DISPLAY DCDET DCDET MUTE_H CENTER SYNC SUBWOOFER JK6002 HEADPHONE VR6001 JOG VOL JK6010 MIC1 Q6071 Q6072 Q6073 MIC AMP MIC AMP MIC AMP...
  • Page 52 SA-HT530GCP IC2601 C0ABBB000118 DUAL OP-AMP Q2607 SWITCH IC2602 C0ABBB000118 DUAL OP-AMP D2601 FL6000 FL DISPLAY FROM POWER TRANSFORMER 5,10,12,16, 6~9,11,13~15, 19,21,22,24, 17,18,20,32,34, 30,31,33,35,38 36,37,49~41 14,18,20,22~24, 12,13,16,17,19,21,25, 26,29,33,35 27,28,30~32,34,36~39 IC6000 Q2604 Q2703 C0HBB0000044 FL DRIVER IC SWITCH IC2014 C1BB00000979 2(4) ANALOG SURROUND IC...
  • Page 53 SA-HT530GCP D2827 D2826 +12V D2853 D2825 Q2816 TUNER+9V REGULATOR D2850 Q2814 +7.5V REGULATOR D2824 D2822 Q2813 SW5V XXXX D2851 Q2818 Q2801 DCDET SWITCH SWITCH D+1.2V IC2803 C0DBEZG00021 D+5V REGULATOR IC L2801 A+5V D2831 Q2803, Q2804 M+9V CURRENT CONTROL, CURRENT STABLIZER...

  • Page 54: Schematic Diagram

    SA-HT530GCP 21 Schematic Diagram (All schematic diagrams may be modified at any time with the development of the new technology) Note: S901 : PLAY switch S902 : OPEN switch S6000 : OPEN/CLOSE switch S6001 : FF switch S6002 : REW switch...

  • Page 55: Optical Pickup Unit Circuit

    SA-HT530GCP 21.1. Optical Pickup Unit Circuit SCHEMATIC DIAGRAM - 1 OPTICAL PICKUP UNIT CIRCUIT : +B SIGNAL LINE : CD-DA SIGNAL LINE J0JBC0000105 J0JBC0000105 TO ACT GND (IM) MODULE VREF2(RF-) CIRCUIT PIN (DVD) (FP8501) ON LD (CD) SCHEMATIC LD GND...

  • Page 56: A) Dvd Module (Dv2) Circuit

    SA-HT530GCP 21.2. (A) DVD Module (DV2) Circuit SCHEMATIC DIAGRAM - 2 DVD MODULE (DV2) CIRCUIT : +B SIGNAL LINE : CD-DA SIGNAL LINE TRV-I-SW D+5V FODRV TRDRV C8251 6.3V220 R8265 TL8201 VHALF C8262 R8201 C8261 2.2K PNRST BIAS1 LDCNT MUTE3...
  • Page 57 SA-HT530GCP SCHEMATIC DIAGRAM - 3 DVD MODULE (DV2) CIRCUIT : +B SIGNAL LINE D+3.3V IC8111 C0CBCBD00018 3.3 REGULATOR IC TP8111 D+5V C8111 C8112 R8112 R8111 IC8111 C8113 QR8112 470P QR8111 Cont UNR521400L UNR521400L SWITCH SWITCH D+1.2V QR8571 UNR511V00L SUPPLY CONTROL SWITCH...
  • Page 58 SA-HT530GCP SCHEMATIC DIAGRAM - 4 : MAIN SIGNAL LINE DVD MODULE (DV2) CIRCUIT : DVD VIDEO SIGNAL LINE : +B SIGNAL LINE FP8101 VGND Y/PY/G Y/PY/G LB8303 J0JCC0000119 TC8303 VGND CB/PB/B CB/PB/B LB8304 J0JCC0000119 TC8304 VGND CR/PR/R CR/PR/R LB8305 J0JCC0000119...
  • Page 59 SA-HT530GCP SCHEMATIC DIAGRAM - 5 DVD MODULE (DV2) CIRCUIT : +B SIGNAL LINE IC8651 RFKWMH82B160 16M FLASH ROM IC EXADT15 EXADR16 EXADT14 XBYTE EXADT13 EXADT12 FDT15 DQ15/A-1 EXADT11 FDT7 EXADT10 FDT14 DQ14 EXADT9 FDT6 EXADT8 FDT13 DQ13 EXADR19 FDT5 EXADR20...
  • Page 60 SA-HT530GCP SCHEMATIC DIAGRAM - 6 DVD MODULE (DV2) CIRCUIT : +B SIGNAL LINE C8028 C8027 C8026 C8024 C8023 C8051 2200P MDQ0 MDQ15 DQ15 C8052 VDDQ VSSQ MDQ14 MDQ1 DQ14 C8025 C8022 MDQ2 MDQ13 DQ13 C8057 2200P RX8013 (82 x 4)
  • Page 61 SA-HT530GCP SCHEMATIC DIAGRAM - 7 DVD MODULE (DV2) CIRCUIT : +B SIGNAL LINE RX8018 (82 x 4) RX8017 RX8014 (82 x 4) (82 x 4) C8021 RX8015 (22 x 2) MDQ9 MDQ24 MDQ5 VDD33 MDQ10 TRCST MDQ4 TRCDATA3 VDD33 TRCDATA2...
  • Page 62 SA-HT530GCP SCHEMATIC DIAGRAM - 8 : CD-DA SIGNAL LINE : DVD VIDEO SIGNAL LINE DVD MODULE (DV2) CIRCUIT : +B SIGNAL LINE : DVD AUDIO SIGNAL LINE LB8001 J0JHC0000045 D+3.3V D+1.2V C8002 C8001 LB8002 4V330 6.3V100 J0JHC0000045 C8017 RX8031 (4.7K x 2)

  • Page 63: B) Main Circuit

    SA-HT530GCP 21.3. (B) Main Circuit SCHEMATIC DIAGRAM - 9 : MAIN SIGNAL LINE : +B SIGNAL LINE MAIN CIRCUIT : FM/AM SIGNAL LINE : DVD VIDEO SIGNAL LINE : -B SIGNAL LINE R2803 2.2K VREF+ R2804 Q2030 2.7K Q2702 B1GBCFJN0033...
  • Page 64 SA-HT530GCP SCHEMATIC DIAGRAM - 10 : DVD VIDEO SIGNAL LINE : MAIN SIGNAL LINE : +B SIGNAL LINE MAIN CIRCUIT : FM/AM SIGNAL LINE : -B SIGNAL LINE W2014 R2264 R2178 R2265 R2165 C2822 6.8K 6.8K 0.01 GOUTSUB R2278 R2164...
  • Page 65 SA-HT530GCP SCHEMATIC DIAGRAM - 11 : +B SIGNAL LINE MAIN CIRCUIT : MAIN SIGNAL LINE : -B SIGNAL LINE W2028 C2833 16V47 C2831 16V47 R2153 C2153 R2147 R2149 16V100 HP_L R2145 6.8K R2148 R2150 C2150 R2146 50V1 C2254 C2151 0.01...
  • Page 66 SA-HT530GCP SCHEMATIC DIAGRAM - 12 : +B SIGNAL LINE MAIN CIRCUIT : -B SIGNAL LINE : MAIN SIGNAL LINE IC2601 C0ABBB000118 DUAL OP AMP +7.5V R2642 C2621 R2639 R2663 W2009 6.8K 3.9K C2633 R2636 220P R2656 R2640 IC2602 4.7K C0ABBB000118...
  • Page 67 SA-HT530GCP SCHEMATIC DIAGRAM - 13 MAIN CIRCUIT : +B SIGNAL LINE R2897 STBY_LED R2085 R2057 Q2029 R2056 B1GBCFJN0033 R2058 LED DRIVE R2059 FLD_DA FLD_DA SCART_MUTE VOL_CLK R2037 VOL_CLK VOL_DA R2036 VOL_DATA W2060 MIC_SW MUTE_L R2080 R2035 YC_H RGB_H R2034 RGB_H...
  • Page 68 SA-HT530GCP SCHEMATIC DIAGRAM - 14 : +B SIGNAL LINE MAIN CIRCUIT : -B SIGNAL LINE D2822 B0FBAM000010 IC2803 C0DBEZG00021 REGULATOR IC D2803 B0ACCK000005 D+1.2V R2826 C2842 R2829 L2802 R2834 G0A200D00002 A+5V R2833 W2062 AA+5V C2825 C2824 C2823 R2898 R2835 D2811 IC2801 6.3V330...
  • Page 69 SA-HT530GCP SCHEMATIC DIAGRAM - 15 : +B SIGNAL LINE MAIN CIRCUIT : MAIN SIGNAL LINE : -B SIGNAL LINE D2827 R2849 R2851 B0EAKM000117 4.7K Q2818 B1GBCFJA0028 Q2814 DCDET SWITCH DCDET 2SD21370PA Q2818 R2850 R2841 REGULATOR D2851 C2841 C2847 C2853 D2852...

  • Page 70: C) Panel Circuit

    SA-HT530GCP 21.4. (C) Panel Circuit SCHEMATIC DIAGRAM - 16 : -B SIGNAL LINE PANEL CIRCUIT : +B SIGNAL LINE FL6000 A2BD00000108 FL DISPLAY 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 R6050 +7.5V...

  • Page 71: D) Microphone Circuit

    SA-HT530GCP 21.5. (D) Microphone Circuit SCHEMATIC DIAGRAM - 17 : +B SIGNAL LINE : MIC SIGNAL LINE MIC CIRCUIT Q6073 Q6071 JK6011 B1ABCF000011 B1ABCF000011 MIC2 R6085 R6095 MIC AMP MIC AMP 8.2K L6004 R6092 J0JBC0000019 R6088 C6070 C6086 C6087 L6005...

  • Page 72: E) Headphone Circuit & (F) Cd Tray Loading Circuit

    SA-HT530GCP 21.6. (E) Headphone Circuit & (F) CD Tray Loading Circuit SCHEMATIC DIAGRAM - 18 HEADPHONE CIRCUIT : MAIN SIGNAL LINE : +B SIGNAL LINE R6024 R6025 R6026 R6099 R6022 R6023 2.2K 2.7K 1.2K 1.8K S6000 S6001 S6002 S6003 S6004...

  • Page 73: Printed Circuit Board

    SA-HT530GCP 22 Printed Circuit Board 22.1. (A) DVD Module P.C.B. (Side A & B) DVD MODULE P.C.B (REP3867F) FP8501 TO OPTICAL PICKUP UNIT R8263 23 21 C8262 C8255 R8261 C8257 C8252 C8251 Q8552 Q8562 R8554 C8554 R8558 IC8606 R8553 R8565...
  • Page 74 SA-HT530GCP DVD MODULE P.C.B (REP3867F) CKE24 C8503 LB8502 CKE6 CKE11 CKE12 CKE19 CKE25 CKE14 IC8251 CKE2 CKE22 CKE3 CKE9 C8502 CKE13 CKE23 RX8502 RX8504 CKE7 CKE5 RX8501 RX8503 C8506 LB8514 D8550 R8569 Q8560 C8261 C8254 LB8507 TL8513 R8262 R8264 CKE4...
  • Page 75 SA-HT530GCP 22.2. (B) Main P.C.B. MAIN P.C.B (REPX0452F) JK2001 C2803 R2885 C2807 R2884 16-G 17-Y L2026 R2891 L2027 S-VIDEO 15-G R2890 C2805 14-G 13-C C2042 VOUT-Y 21-G 23-Y L2022 R2878 R2886 C2044 R2879 C2814 R2883 L2025 VIDEO OUT 22-V R2882...
  • Page 76 SA-HT530GCP W2326 C2022 R2092 W2201 IC2019 C2019 (NOT SUPPLIED) W2565 C2020 R2094 IC2010 W2410 W2210 R2077 C2226 Q2030 R2803 W2212 R2002 R2804 Q2004 C2225 C2222 Q2000 W2110 R2003 W2336 R2215 H2000 D2000 D2042 R2214 C2038 W2548 R2212 D2003 R2064 R2072...

  • Page 77: C) Panel P.c.b., (D) Mic P.c.b. & (E) Headphone P.c.b

    SA-HT530GCP 22.3. (C) Panel P.C.B., (D) Mic P.C.B. & (E) Headphone P.C.B. PANEL P.C.B (REPX0456B) CN6008 C6011 HT530 W603 IC6000 W602 FL6000 41 40 MIC P.C.B (REPX0452F) MIC VOLUME MIC 2 MIC 1 JK6011 JK6010 VR6001 L6004 L6006 R6082 C6071...
  • Page 78 SA-HT530GCP H6010 D6000 S6014 S6013 S6012 S6011 H_BASS SELECTOR POWER R6005 W603 W602 HEADPHONE P.C.B (REPX0456B) SENSOR Z6000 S6001 S6002 S6000 OPEN/CLOSE W6002 VR6000 R6099 S6005 S6004 L6001 PLAY PAUSE C6000 S6003 STOP W6006 W6005 8 10 CN6032 JK6002 HEADPHONE...

  • Page 79: F) Cd Tray Loading P.c.b

    SA-HT530GCP 22.4. (F) CD Tray Loading P.C.B. CD TRAY LOADING P.C.B ( REP3288A ) IC904 RM902 S902 CN901 OPEN SW S901 PLAY SW...

  • Page 80: Wiring Connection Diagram

    SA-HT530GCP 23 Wiring Connection Diagram TO ACTIVE SUBWOOFER SB-WA530GCP-S VIDEO VIDEO AUDIO VOUT-CR VOUT-CB VOUT-Y VIDEO JK2001 JK2000 DVD MODULE P.C.B. FP8101 SIDE:B TUNER PACK CN2002 MAIN P.C.B. FP8201 6 ..1 SPINDLE MOTOR...
  • Page 81 SA-HT530GCP HEADPHONE P.C.B. OPTICAL PICKUP 19 ..1 18 ..2 CN6008 CN6032 1 ....25 2 .

  • Page 82: Illustration Of Ic 痴, Transistors And Diodes

    SA-HT530GCP 24 Illustration of IC’s, Transistors and Diodes RFKWMH82B160 C1BB00000845 (80p) C1BB00000979 (20p) C0AABB000125 C0ABBB000118 C3ABPG000133 (54p) C0HBB0000044 (48p) C2CBHG000168 MN2DS0003APH (256p) C0EBA0000031 (5p) C0CBCBD00018 (8p) C9ZB00000466 (16p) C0EBE0000384 C0CBADG00023 (3p) C0JBAA000346 (5p) C3EBGC000044 (8p) C0DAAZG00012 C0DBEZG00021 C0GBG0000048 (28p) C0FBBK000050 (28p)

  • Page 83: Terminal Function Of Ic 痴

    SA-HT530GCP 25 Terminal Function of IC’s 25.1. IC2018(C2CBHG000168): Pin No. Mark Function N.C. No connection Microprocessor HB_MUTE H.Bass Mute HB_LVL H.Bass Level Select Pin No. Mark Function C_MIX DPL II Bass Improve TRY_CLOSE Loading Mecha Close Sw SURR_FC1 Surround Freq. Limiter 1...
  • Page 84 SA-HT530GCP Pin No. Mark Function Pin No. Mark Function MDQ13 I/O SDRAM Data 13 MDQ1 I/O SDRAM Data 1 I/O General Use Port 6 Exterior Interruption 2 MDQ14 I/O SDRAM Data 14 16 Bits Timer Exterior Count Source MDQ0 I/O SDRAM Data 0...
  • Page 85 SA-HT530GCP Pin No. Mark Function Pin No. Mark Function MONI0 I/O Inside/ Internal Monitor 0 DAC3OUT Cr (Colour Difference)/ R (Red) Exterior/ Outside Memory Data 0 Analog Signal General Use Port 31 VREF Inside/ Internal DAC Reference Digital Video Output 0...
  • Page 86 SA-HT530GCP Pin No. Mark Function Pin No. Mark Function TRCDATA3 I/O Debug Use Input Output Trace Data SDRAM Address 9 VDD33 I/O Power Supply Exterior Memory Data 9 NCSM SDRAM Chip Select General Port 26 MCKI SDRAM Output Clock TRCST...

  • Page 87: Parts Location And Replacement Parts List

    SA-HT530GCP 26 Parts Location and Replacement Parts List Notes: · Important safety notice: Components identified by mark have special characteristics important for safety. Furthermore, special parts which have purposes of fire-retardent (resistors), high-quality sound (capacitors), low noise (resistors), etc are used.

  • Page 88: Dvd Loading Mechanism

    SA-HT530GCP 26.1. DVD Loading Mechanism 26.1.1. DVD Loading Mechanism Parts Location...
  • Page 89 SA-HT530GCP 26.1.2. DVD Loading Mechanism Parts List Ref. No. Part No. Part Name & Description Remarks TRAVERSE DECK RHM0003-J MAGNET RDG0547 PULLEY GEAR RDG0548 RELAY GEAR RDG0549 DRIVE GEAR RDV0070 BELT REM0102 MOTOR UNIT RGQ0395-K TRAY RME0350 CHANGE LEVER SPRING...

  • Page 90: Cabinet

    SA-HT530GCP 26.2. Cabinet 26.2.1. Cabinet Parts Location...
  • Page 91 SA-HT530GCP...

  • Page 92: Component Parts List

    SA-HT530GCP 26.2.2. Cabinet Parts List Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks CABINET AND CHASSIS RHD26046 SCREW RHD30007-1SJ SCREW J3CCBB000004 TUNER PACK RHD30090-1 SCREW REEX0426 10P FFC WIRE (PANEL)
  • Page 93 SA-HT530GCP Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks D2809 B0EAKM000117 DIODE L2802 G0A200D00002 COIL D2810 B0EAKM000117 DIODE L2803 G0A200D00002 COIL D2811 B0EAKM000117 DIODE L6000 J0JBC0000019 CHIP INDUCTOR D2812 B0EAKM000117...
  • Page 94 SA-HT530GCP Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks W2027 ERJ6GEY0R00V CHIP RESISTOR R2008 ERJ3GEYJ103V 10K 1/16W W2028 ERJ6GEY0R00V CHIP RESISTOR R2011 ERJ3GEYJ473V 47K 1/16W W2030 ERJ3GEY0R00V CHIP RESISTOR R2012...
  • Page 95 SA-HT530GCP Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks R2116 ERJ3GEYJ104V 100K 1/16W R2271 ERJ3GEY0R00V 0 1/16W R2117 ERJ3GEYJ104V 100K 1/16W R2278 ERJ3GEYJ223V 22K 1/16W R2125 ERJ3GEYJ182V 1.8K 1/16W R2300...
  • Page 96 SA-HT530GCP Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks R2642 ERJ3GEYJ683V 68K 1/16W R2880 ERJ3GEYJ1R0V 1 1/16W R2643 ERJ3GEYJ104V 100K 1/16W R2881 ERJ3GEYJ1R0V 1 1/16W R2644 ERJ3GEYJ273V 27K 1/16W R2882...
  • Page 97 SA-HT530GCP Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks R8233 ERJ2GEJ153X 15K 2W LB8301 J0JCC0000119 CHIP INDUCTOR R8235 ERJ2GEJ822X 8.2K 2W LB8302 J0JCC0000119 CHIP INDUCTOR R8236 ERJ2GEJ822X 8.2K 2W LB8303...
  • Page 98 SA-HT530GCP Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks C2130 ECJ1VB1A154K 0.15 10V C2402 ECJ1VB1H471K 470P 50V C2131 ECJ1VB1H332K 3300P 50V C2403 ECJ1VB1A105K 1 10V C2133 ECJ1VB1A105K 1 10V C2404 ECEA1HKAR33B 0.33 50V...
  • Page 99 SA-HT530GCP Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks C2827 ECEA1HKA100I 10 50V C8013 ECJ0EF1C104Z 0.1 16V C2828 ECA1HM101B 100 50V C8014 ECJ0EF1C104Z 0.1 16V C2829 ECA1HM101B 100 50V C8015 ECJ1VB0J105K 1 6.3V...

  • Page 100: Packing Materials & Accessories Parts List

    SA-HT530GCP Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks C8307 ECJ0EF1C104Z 0.1 16V C8551 ECJ0EF1C104Z 0.1 16V C8308 ECJ0EC1H150J 15P 50V C8552 F2G1C100A072 10P 16V C8311 ECJ0EF1C104Z 0.1 16V C8553 F2H0J470A003 47P 6.3V...

  • Page 101: Packaging

    SA-HT530GCP 26.5. Packaging PRT0503D/K/J/E/A/L...

This manual is also suitable for:

Sb-pc730Sb-fs530Sb-wa530Sa-ht530

Table of Contents