Installing the IPCMPR Card in the PBX
Install the IPCMPR card in the IPCMPR card slot of the PBX.
Note
The illustrations of the PBX shown in the installation procedure are based on the KX-TDE200.
1.
Insert the card along the guide rails.
2.
Holding the card as shown below, push the release lever in the direction of the arrow so that the card
engages securely with the connector on the back board.
Release Lever
3.
Turn the 2 screws clockwise to fix the card in place.
Screws
Note
Make sure the screws are tightened to earth the card securely.
Back Board
2.2 Installing the DSP16/DSP64 Card
Guide Rail
Getting Started for Virtual IP Cards
11