Cisco 4000 Series Hardware Installation Manual page 145

Chapter 5 Install and Upgrade Internal Modules and FRUs
On-board Quack2 for module authentication
•
Power and reset
•
Firmware upgrade
•
The removal of a drive during active read-write operation is not supported. Ensure that the drive is shut
Note
down before you replace the NIM-HDD.
Figure 5-16
Figure 5-18
Figure 5-16
Figure 5-17
OL-32185-02
shows the HDD card that can be inserted into the NIM chassis shown in
shows the entire Cisco NIM-HDD.
HDD Card
NIM Chassis for the HDD
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
Overview of NIM-HDD Card
Figure 5-17.
5-21