Advertisement
2. INTRODUCTION
Compact digital tyre inflator with output of 12ltr/min. Pressure gauge reads up to 120psi. 140mm Extension tube with Schrader connection.
Micro USB rechargeable (cable not supplied). USB output for charging mobile phone etc. (5V/2A). Supplied with sports ball pin adaptor
and balloon/inflatables adaptor. Built-in 1W SMD LED for ease of use at night. Preset the desired psi to begin operation and unit will cut out
automatically once that pressure is reached. Auto cut-out if hose kinks, to avoid damage to pump.
1.Outlet Grid
5.Unit Button
9. Inlet grid
13. USB output port
3. SPECIFICATION
Hose Length:.............................................................. 140mm
Typical Inflation Time: .......... 0-30psi in 619sec (175/70/R13)
Maximum Pressure: .................................................... 120psi
Airflow: ........................................................0.42cfm/12ltr/min
USB Output: ................................................................. 5V/2A
Battery: ......................................................2000mAh/22.2Wh
4. OPERATION
4.1.
CHARGING
4.1.1.
Please charge the battery fully before use (fig.2). Especially
for the first time or after it is unused for a long time. Recommend
an USB adapter with output capability of 5V/1.5A or 5V/2A,
about 4 hours for full charging. Other functions of the product
are not available during charging.
4.2.
USING THE USB CHARGING PORT
4.2.1.
USB output of CTI120 is plug and play
4.2.2.
The air pump will not work, when you are
charging a device from the tyre inflator.
The USB output will turn off automatically.
© Jack Sealey Limited
2. Pressure gauge
6.Start/Stop button
10.LED Lighting
14.Micro USB input port
Original Language Version
3. Reduce button
7.LED Lighting button
11.Hose Connector
15. Air hose
fig.2
fig.1
4.Increase Button
8.Indicator
12.Outlet Grid
16. 4×Valve adapters
fig.3
CTI120 Issue 2(3) 07/03/18
Advertisement
