PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL CONTENTS Page Page 1 Safety Precautions 11.7. Removal of R-P.C.Board 1.1. General Guidelines 11.8. Removal of S-P.C.Board 1.2. Leakage Current Check 11.9. Removal of Ballast-1 and Ballast-2 Modules 2 Specifications 11.10. Removal of Lamp Unit 3 Function for Safety 11.11.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 3. Connect M1 to T1 according to Fig. 2 and measure the 1 Safety Precautions voltage. 4. Change the connection of M1 from T1 to T2 and measure 1.1. General Guidelines the voltage again. ·...
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 3 Function for Safety 3.1. Interlock Switch To ensure safety, the protection circuit of the main unit functions, and this projector becomes operation halt condition (a part of circuit is energizing) when the lamp unit cover is removed or installed incorrectly. 4 Serviceman Mode This projector has Serviceman Mode in addition to standard on-screen menus (User Mode).
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Set the operation mode selector (Computer/Numeric, Projector) switch to “Projector” on the remote control unit and press the ENTER button. Press the MENU button. Note: · "SERVICEMAN" will appear. 4.2. Resetting to User Mode Press the MENU button.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 4.3. Functions in Serviceman Mode 4.3.1. EXT OPTION "EXT OPTION" is added to the MENU. 1. CUT OFF Sets the display ON/OFF for each color (R, G, B). 2. LAMP RELAY "OFF", "4h", "5h", "6h" . . . "10h", "11h", "12h": If "SINGLE"...
Page 11
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL [2nd page] [3rd page] 4. CW INDEX When the color wheel is replaced, adjusts it with buttons. a. Decrease CW INDEX setting value from the default value (289) by 50, and set it to 239. A blue-purple color mixture appears in the upper right or the upper of the screen.
Page 12
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 5. ERROR OSD Displays the lamp status with OSD when you do not see the status LED lights because the rear projection, etc. 6. H.MASK PULSE When the signal of 480i or 576i is inputted, the synchronization might become unstable. It might be stable when H.MASK PULSE is set to "SPECIAL".
Page 13
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Note: · SUB-KEYSTONE is a supplementary adjustment function and there is no guaranty of completely functioning. Use it within the range where the trouble such as deforming the shape of the image does not occur. 4.3.3.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 5 Using the Serial Terminals SERIAL terminals which are on the side-mounted connection terminals conform to RS-232C standard. This projector can be controlled by a PC which is connected as shown below. Also SERIAL OUT terminal is provided to enable plural projector control. 5.1.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Attention · No command can be sent or received for 10 to 60 seconds after the lamp starts lighting. Try sending any command after that period has elapsed. · When sending several commands, be sure to wait for a response from the projector before sending the next command. When sending commands without parameters, a colon (:) is not necessary.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 5.6. Control commands 5.6.1. Input Commands Items Commands:Parameters Functions Callback Remarks POWER POWER ON Calls back PON even if REMOTE2 is effective. STAND-BY Calls back even REMOTE2 is effective. FREEZE OFZ:0 FREEZE key OFZ:0 OFZ:1 0=OFF 1=ON...
Page 17
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL *1 In the SINGLE mode, one of lamp 1 and lamp 2 whose remainder time is longer is turned ON. *2 The input of p1p2 accepts any of the types +1, +01, 1 and 01. *3 Displays of SET DATE and SET TIME are set by UTC (Coordinated Universal Time).
Page 18
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Items Commands:Para Functions Callback Interpretati Remarks meters DISPLAY DOTS Display dots p1p2p3p4 TOTAL LINES Total lines p1p2p3p4 DISPLAY LINES Display lines p1p2p3p4 CLAMP POSITION QLT Inquiry about ClAMP POSITION p1p2p3 KEYSTONE Inquiry about KEYSTONE p1p2p3 LINEARITY Inquiry about LINEARITY...
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 5.7. Cable specifications Note To connect the computer to the SERIAL terminal, prepare an adequate communication cable that fits to your personal computer.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 6 Using a Wired Remote Control 6.1. Connection Example When two or more projectors are connected in the system, connect the projectors with the supplied remote control cable to simultaneously control the projectors with a remote control unit through the REMOTE1 IN/OUT terminal. It is effective to use the wired remote control in the environment in which an obstacle stands in the light path or where the system is susceptible to outside light.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 7 Support for Service 7.1. Supporting Methods We will support according to the following methods. Supporting methods Applied parts Replaced by module or block FM-Module (For specified components, supplies them discretely.) Ballast module Power module Replaced by discrete components Other components...
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 10 Replacement of Lamp Unit Cautions · Wait until the lamp is cooled sufficiently before replacing the lamp unit. 10.1. Precautions on Lamp Unit Replacement · Be careful when handling a light source lamp . The lamp may burst if it hit by solid objects or if it is dropped because of high air pressure inside the bulb.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 10.3. Indication of Lamp Monitor 10.4. Procedure of Lamp Unit Replacement NOTE: · Be sure to follow steps 11 to 17 in ten minutes after turning on the projector because the projector is turned off in ten minutes if the RUNTIME indication is 1 500h or more.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 11.2. Removal of Upper Case Unscrew the 8 screws and remove the top plate. Remove the filters (R, L). (Pull them horizontally out.) Loosen the 1 screw fixing the lamp unit cover until it idles, slightly slide the cover horizontally and remove it.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Unscrew the 5 screws and remove the A-P.C.Board block. Pull out the flexible cable connected to the J-P.C.Board. (The reverse side of A-P.C.Board) Unscrew the 10 screws and remove the A-P.C.Board. (The block of the terminal metal fittings, J-P.C.Board and D-P.C.Board remains.) 11.4.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 11.6. Removal of Power Module Remove the A-P.C.Board block according to the steps 1 through 3 in the section 11.3. "Removal of A-P.C.Board". Unscrew the 2 screws and release the 2 grounding terminals. Unscrew the 6 screws and remove the shield cover.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 11.9. Removal of Ballast-1 and Ballast-2 Modules Remove the upper case according to the section 11.2. "Removal of Upper Case". Unscrew the 3 screws and release the grounding terminals. Unscrew the 2 screws and release the lamp unit terminals. Loosen the 2 screws until they idle and open the exhaust fan unit Loosen the 2 screws fixing the lamp unit until they idle and remove the lamp unit 2.
Page 32
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Unscrew the 1 screw and release the lamp unit terminal. Unscrew the 3 screws and release the ballast block. Unscrew the 2 screws and remove the ballast fan. (10) Disconnect the connectors to the ballast-1 and ballast-2 modules.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL (12) Remove the ballast module while pressing hooks of the 4 resin stands (spacers) to shut. 11.10. Removal of Lamp Unit Loosen the 1 screw fixing the lamp unit cover until it idles, slightly slide the cover horizontally and remove it.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Loosen the 2 screws fixing the lamp unit until they idle, hold the grip and take the lamp unit out. 11.11. Removal of Projection Lens Fully turn the projection Lens counterclockwise. Turn the projection lens counterclockwise in addition while pressing the lens lock button.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Unscrew the 2 screws and release the lamp unit terminal 1. Unscrew the 1 screw and release the lamp unit terminal 2. Unscrew the 1 screw and remove the thermofuse. Unscrew the 1 screw and remove the shield cover. Unscrew the 2 screws and release the grounding terminals.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Unscrew the 3 screws and remove the synthesis mirror. Notes: · When the synthesis mirror is removed, be careful not to deform or damage the component (shading plate) of the rod (complete). · Do not touch the surface of the synthesis mirror. If it becomes dirty or damaged, the performance may be deteriorated.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 11.16. Removal of Full Reflection Mirror (complete) Remove the upper case according to the section 11.2. "Removal of Upper Case". Unscrew the 2 screws and remove the color wheel cover. Unscrew the 3 screws and remove the full reflection mirror (complete).
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 12 Troubleshooting The alphabets in the left box of the inspection items indicate the names of P.C.Boards or modules to be checked.
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL 14 Block Diagram 14.1. Power Supply Power Supply Igniter Lamp+ Transformer Lamp- Low Voltage Power Supply Current Voltage Control Detector Detector THERMOFUSE From A-P.C.Board A5 Fixed Power Converter Control Ignition Pulse Voltage typ.15kVo-p FUSE FUSE DC380V...
EXHAUST FAN METAL(R) N2QAEA000023 REMOTE CONTROLLER TMKG389 FAN SPONGE TBLB3081 ADJUSTER TMKG481 PROTECTION DUST TBLG3042 RUBBER LEG (REAR) SHEET(FAN) TBMA159 PANASONIC BADGE TMKG482 PROTECTION DUST TBMF639 MODEL NAME PLATE PT-D5500U SHEET(DUCT) TBMF641 MODEL NAME PLATE PT-D5500E TMKG518 SPONGE 1 TBMF644...
Page 81
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description TMME240 P.C.B SPACER TXJ/P7VJW2 LEAD WIRE(P7 - FM2) TMME245 SPACER TXJA20VJW2 LEAD WIRE(A20 - D1) TMMX119 SHADING LOUVER TXJA40VJW2 LEAD WIRE(A40 - FM3) (EXHAUST R/L)
Page 82
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description IC2511 C3BBFC000290 Q2501 2SD1819A TRANSISTOR 2SD1819AW IC2512 C3BBFC000290 Q2503 2SD1819A TRANSISTOR 2SD1819AW IC2513 TC7SH32FTL C0JBAE000146 Q2505 2SD1819A TRANSISTOR 2SD1819AW IC2514...
Page 83
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description D2512 B3ABB0000189 DIODE L2004 J0JJC0000022 EMI FILTER D3000 MA8056M DIODE MAZ80560M L2005 J0JJC0000022 EMI FILTER D3001 MA8056M DIODE MAZ80560M L2006...
Page 84
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description L9909 J0JCC0000168 FILTER FL9821 J0HABB000021 FILTER L9950 J0JCC0000168 FILTER FL9822 J0HABB000021 FILTER FL2506 J0HABB000021 FILTER FL9823 J0HABB000021 FILTER FL2507 J0HABB000021...
Page 85
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description R2092 D1HG2208A002 RESISTOR R2198 ERJ3GEYJ103 M 10K OHM,J,1/16W R2094 ERJ3GEYJ220 M 22 OHM,J,1/16W R2201 ERJ3GEYJ103 M 10K OHM,J,1/16W R2096 ERJ3GEYJ220 M 22 OHM,J,1/16W...
Page 86
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description R2565 ERJ3GEYJ220 M 22 OHM,J,1/16W R2647 ERJ6GEYJ101 M 100 OHM,J,1/10W R2566 ERJ3GEYJ220 M 22 OHM,J,1/16W R2648 ERJ6GEYJ101 M 100 OHM,J,1/10W R2567 ERJ3GEYJ220...
Page 87
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description R3026 ERJ3GEYJ103 M 10K OHM,J,1/16W R3162 ERJ6ENF75R0 M 75 OHM, 1/10W R3027 ERJ3GEYJ103 M 10K OHM,J,1/16W R3163 ERJ6ENF75R0 M 75 OHM, 1/10W R3028...
Page 88
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description R3305 ERJ2GEJ330 M 33 OHM, 0.063W R3545 ERJ6GEYJ103 M 10KOHM,J,1/10W R3306 ERJ2GEJ103 M 10K OHM, 0.063W R3546 ERJ6GEYJ104 M 100KOHM,J,1/10W R3308...
Page 89
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description R3782 ERJ6ENF39R0 M 39 OHM, 1/10W R3930 ERJ2GEJ220 M 22 OHM, 0.063W R3783 ERJ6ENF2700 M 270 OHM, 1/10W R3936 ERJ3GEYJ103 M 10K OHM,J,1/16W...
Page 90
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description R9965 ERJ6ENF1501 M 1.5KOHM, 1/10W C2075 ECJ1VF1C105Z C 0.01UF, Z, 16V R9966 ERJ6ENF1501 M 1.5KOHM, 1/10W C2076 ECJ1XF1C104Z C 0.1UF, Z, 16V R9967...
Page 91
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description C2589 ECJ1XF1C104Z C 0.1UF, Z, 16V C3090 ECJ1XB1H103K C 0.01UF, K, 50V C3000 ECJ1XB1H103K C 0.01UF, K, 50V C3091 EEEHP0J470P E 47UF, 6.3V...
Page 92
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description C3308 ECJ1XF1C104Z C 0.1UF, Z, 16V C3427 ECJ1XF1C104Z C 0.1UF, Z, 16V C3309 ECJ1XF1C104Z C 0.1UF, Z, 16V C3428 ECJ1XF1C104Z C 0.1UF, Z, 16V...
Page 93
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description C3735 ECJ1XF1C104Z C 0.1UF, Z, 16V C9828 ECJ1XF1C104Z C 0.1UF, Z, 16V C3736 ECJ1XF1C104Z C 0.1UF, Z, 16V C9901 ECJ1XF1C104Z C 0.1UF, Z, 16V...
Page 94
PT-D5500U / PT-D5500E / PT-D5500UL / PT-D5500EL Ref. Part No. Part Name & Remarks Description SW9965 EVQ11G05R SWITCH X2002 H1A6605B0004 CRYSTAL X2003 H0J250500042 CRYSTAL X2501 H0J983400016 CRYSTAL X2502 H0J327200038 CRYSTAL X3000 H0J202500002 CRYSTAL X3002 H1A6005B0012 CRYSTAL N0ZZ00000012 BALLAST UNIT TXAUX01VJW2 POWER UNIT PT-D5500U/UL TXAUX01PWJZ...