Panasonic EH‑XR10 Operating Instructions Manual page 14

3
3
Apply the conductive gel while the appliance
is preheating.
• We recommend using a conductive gel that helps
transmit RF and ultrasonic energy.
1. Apply a macadamia nuts size
(approximately 3 g) of gel into your
hand.
2. Spread the gel around the areas of
your face that you want to treat with
this appliance as illustrated by the
areas in the fi gure.
• Spread conductive gel gently on
your face. Do not rub gel into skin.
Daily skin care products can also be used
• Use the conductive gel or skin care products to help
transmit the RF and ultrasonic energy to the skin.
• Use skin care products that will provide a slippery
surface for the appliance.
Skin care products with large amounts of oil can
obstruct the transmission of RF and ultrasonic energy.
Gel, serum, and milky lotion
• If friction begins to develop during use, add some more
skin care product to prevent any negative effects on
the skin due to friction.
14
EH-XR10_HK.indb 14
Cream, toner, lotion, and oil
4
4
Preheating process completes (takes
approximately 1 minute).
The preheating process will fi nish approximately 1
minute after turning on the power. A tone will be
triggered, and indicators change from fl ashing to
glowing states to indicate that the appliance is ready.
Glowing
LOW MED
Notes
• The appliance can be used on the skin even while
indicators are fl ashing. The lamps will begin glowing
once contact is made with the skin.
• An alert tone will be triggered 15 seconds after the
appliance is not in contact with the skin. Then, the power
will automatically turn off after approximately 1 minute.
Changing the level after the preheating process
completes
The level changes with each pressing of the
LOW MED
• Select an appropriate level while paying attention to
the condition of skin.
Glowing Glowing
HIGH
.
HIGH
2020/01/24 18:17:47