Husqvarna HA110 Operator's Manual page 9

4. Hold the product as close to your body as possible to
get the best balance.
5. Make sure that the tip does not touch the ground.
6. Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
To change the hedge trimmer angle
(HA110)
WARNING: Never use HA110 with a battery
operated power unit.
1. Loosen the knob.
2. Press the cutting unit against the hedge or some
other firm surface until the required angle is set.
820 - 002 -
3. Tighten the knob.
To change the hedge trimmer angle
(HA850)
1. Undo the knob.
2. Adjust the angle with the help of the handle on the
cutting unit.
3. Tighten the knob.
WARNING: Do not hold the cutting head
when you adjust the angle. The blades
are sharp and you could easily cut
yourself.
9