2: Banner; 3: Single Key Acknowledge; Menu System; 1: Main Menu Overview - Honeywell Farenhyt Series Installation And Operation Manual

10.2.2 Banner
The banner is the message that displays on the control panel when the system is in normal mode (no alarm or trouble condition exists and
menus are not in use). You can create a customized message that will display instead of the internal (default) message. See Section 9.6.7
for information on customizing the banner.
Text of
Internal Banner
Text of
Custom Banner
10.2.3 Single Key Acknowledge
This feature allows the user to press the ACK and display the oldest un-acknowledged event in the system. Pressing ACK again will
acknowledge the event, then display the next oldest un-acknowledged event without pressing the arrow keys.

10.3 Menu System

The control panel is easy to operate from the Main Menu. To view the Main Menu press the ENTER or the right arrow key on the control
panel or remote annunciator. The Main Menu will appear as shown in Section 10.3.1. Select the desired option and enter your access
code if prompted.
The control panel supports up to 20 access codes. The profile for each access code (or user) can be modified through the programming
menu option (see Section 6.2.5 for access code programming).
10.3.1 Main Menu Overview
The chart below is a brief overview of the Main Menu. These options are described in greater detail throughout this section of the man-
ual.
Main Menu Options
1- System Tests
2- Point Functions
3- Event History
4- Set Time and Date
5- Network Diagnostics
6- Network Programming
7- Panel Programming
8- System Information
IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017
Figure 10.2 Banner Display Examples
Access to Fire Drill, Indicator Test, Walk Tests, Communicator Test, Clear History Buffer,
Manual AlarmNet Registration and Manual Communicator Reset.
Enable/disable points, Point Status, SLC Single Device Locator, SLC Multiple Device Locator,
and I/O Point Control.
Display event history on the LCD. See Section "View Event History" on page 135 for more
information.
Set time and date for the system.
Ping Panel, Data Network Status and Voice Network Status.
Access Learn Network, Edit Network Names, Edit Panel ID, Computer Access, Access Codes,
Communicator Options, Voice Options, Sync Network Options.
Brings up a set of menus for programming the panel. These options are described in detail in
"Programming" on page 109.
Menus to view information about the panel such as model, ID, serial number, revision, send or
receive firmware updates and feature registration activation.
Description
134