Sony FVS-1000 Series Operation Manual page 33

Item
OFF
LUMI/SAT
LUMINANCE
SATURATION
KNEE/SLOPE
KNEE POINT
KNEE SLOPE
FLARE
SHADING
WHITE
BLACK
VSAW
VPARA
HSAW
HPARA
TEST SIGNAL
RAMP
Setting(s)
SAT: Adjust the saturation with the second control knob from
the right.
LUMI LOW: Adjust the lowest level of luminance with the
leftmost control knob.
LUMI HIGH: Adjust the highest level of luminance with the
second control knob from the left.
Disable this function. (The EXECUTE button goes out.)
Adjust the luminance using the leftmost control knob.
Adjust the saturation using the second leftmost control knob.
Adjust the knee point.
Adjust the knee slope.
Adjust the flare.
R (RED): Adjust the flare of red.
G (GREEN): Adjust the flare of green.
B (BLUE): Adjust the flare of blue.
Adjust the shading.
Select BLACK (Mode No. 12) or WHITE (Mode No. 11) by
pressing the cursor or
R (RED): Adjust the VSAW of red.
G (GREEN): Adjust the VSAW of green.
B (BLUE): Adjust the VSAW of blue.
R (RED): Adjust the VPARA of red.
G (GREEN): Adjust the VPARA of green.
B (BLUE): Adjust the VPARA of blue.
R (RED): Adjust the HSAW of red.
G (GREEN): Adjust the HSAW of green.
B (BLUE): Adjust the HSAW of blue.
R (RED): Adjust the HPARA of red.
G (GREEN): Adjust the HPARA of green.
B (BLUE): Adjust the HPARA of blue.
OFF: A normal picture is output.
RAMP: A ramp test signal is output.
button.
Mode Operation
No. No.
48 4
32 2 9 0
23
2 9 0
15 2 9
2 8 9 0
11 12
11. 12.
1.1 1.2
1.1. 1.2.
31