Oven Racks - GE JGRP20 Owner's Manual

Oven Racks (Cont.)
The racks are designed with stop-locks so that, when
placed correctly on the rack supports, they will stop
before coming completely out of the oven and will not tilt
when you are removing food from them or placing food
on them.
When placing cookware on a rack, pull the rack out to
the rack; then slide the rack back into the oven. This will
eliminate reaching into the hot oven.
To remove a rack from the oven, pull the rack toward
you, tilt the front end upward and pull the rack out.
To replace, place the rack on the rack support with the
toward the rear of the oven. Tilt up the front and push
the rack toward the back of the oven until it goes past
the bump on the rack support. Then lower the front of
the rack and push it all the way back.
Rack Positions
The oven has 4 rack supports, identified in this
49-80713 Rev. 2