Laser Safety Guidelines; Laser Warning Labels; Figure 11 Laser Product Label - Nokia 7368 ISAM ONT E-240G-B Product Manual

ANSI ONU safety guidelines

4.3 Laser safety guidelines

Only qualified service personnel who are extremely familiar with laser radiation
hazards should install or remove the fiber optic cables and units in this system.
Observe the following warnings when you perform installation, operations, and
maintenance tasks on the ONU equipment.
Observe the following danger for a laser hazard. Eyes can be damaged when they
are exposed to a laser beam. Take necessary precautions before you plug in the
optical modules.
Per CDRH 21 CFR 10.40.10 (h) (1) (iv) distributors of Class 1 laser products, such
as Nokia ONUs shall leave the following Laser Safety cautions with the end user.
a) "Class 1 Laser Product"
b) "Caution – Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure."
4.3.1
The following figures show sample labels related to laser product, classification and
warning.
Figure
Figure 11
38
Release 06.01.01 | June 2019 | Edition 09
There may be invisible laser radiation at the fiber
Danger —
optic cable when the cable is removed from the connector.
Avoid direct exposure to beam.
Possibility of equipment damage. Risk of eye
Danger —
damage by laser radiation.

Laser warning labels

11 shows a laser product label.
Laser product label
3FE-46261-AAAA-TCZZA
7368 ISAM ONT E-240G-B Product Guide
18455
Issue: 01