Installing The Hard Drive; Removing The Heatsink - Dell OptiPlex 3020M Owner's Manual

4. Perform the following steps as shown in the illustration:
a) Pry the hard-drive bracket apart to release the hard drive [1].
b) Lift the hard drive away from hard-drive bracket [2].

Installing the Hard Drive

1. Insert the hard drive into the hard-drive bracket.
2. Align and place the hard-drive assembly to its slot on the computer.
3. Install the cover.
4. Follow the procedures in

Removing the Heatsink

1. Follow the procedures in
2. Remove the:
a) cover
b) processor fan module
3. Perform the following steps as shown in the illustration:
a) Remove the screws that secure the heatsink to the system board [1].
26 Extracción e instalación de componentes
After Working Inside Your Computer.
Before Working Inside Your Computer.