Epson PERFECTION 1660 PHOTO Setup

R4CA710/B370
Proof Sign-off:
Rev. C
K. Pipa
T. Takahashi
SET_2400.FM
S.Fish
8/5/02
Color Image Scanner
Setup
Unpacking Unpacking Unpacking Unpacking
1. Make sure the following items are included and not damaged. If any items are missing or
damaged, contact your EPSON dealer immediately.
scanner
(Perfection 1660 Photo)
scanner software CD
USB cable
m
Installing the Software Installing the Software Installing the Software Installing the Software
The scanner software CD-ROM contains the EPSON TWAIN driver, software, and electronic manuals.
You must install the software BEFORE connecting the scanner to your computer.
1. Insert the scanner software CD-ROM into the CD-ROM or DVD drive.
Macintosh users:
After inserting the CD-ROM, the EPSON folder appears
on the desktop. (If the EPSON folder does not appear,
double-click the EPSON icon on the desktop.)
Double-click the EPSON icon inside the folder.
2. The EPSON Installation Program dialog box appears.
Select Install Software and click
.
Note for Windows users:
If the EPSON Installation Program dialog box does not
appear, double-click the My Computer icon. Click the
CD-ROM icon, then select Open from the File menu.
Double-click Setup. exe.
Setting Up the Scanner Setting Up the Scanner Setting Up the Scanner Setting Up the Scanner
1. Remove the yellow sticker from the back of the
scanner.
2. Connect the integrated TPU connector to the
scanner's option connector.
3. Slide the transportation lock all the way to the
right.
4. Connect the power cord and AC adapter, as
shown.
5. Connect the AC adapter to the DC inlet on
the back of the scanner.
4xxxxxx
1-F
A2 size
English
4025230-00
xxx
or
scanner
(Perfection 2400 Photo)
power cord AC adapter
film holder
The contents may vary in certain locations.
The appearance of dialog boxes on
this sheet may differ slightly from those
on your screen.
transportation lock
option connector
integrated TPU connector
DC inlet
AC
power cord
adapter
Rev.0 4xxxxxx Rev.0
BK2 1-F C
Warnings, Cautions, and Notes
w c
Warnings Cautions
must be must be
followed carefully to observed to avoid damage
avoid bodily injury. to your equipment.
2. Remove the packing tape from your scanner, but leave the yellow sticker in place until
instructed to remove it.
Important!
Leave the yellow
sticker in place until you
are instructed to
remove it.
3. Follow the on-screen instructions until all of the software is installed. When a message appears
informing you that installation is complete, click OK.
4. Restart your computer if a message appears instructing you to do so.
Note for Mac OS X users:
The software will be installed for use in the Classic mode.
For Perfection 2400 Photo users
® ®
To install Adobe Photoshop Elements, insert the Photoshop CD into the CD-ROM or DVD drive,
then follow the on-screen instructions.
Macintosh users:
After inserting the CD-ROM, double-click the Adobe
the desktop. Then double-click the folder of your preferred language. and double-click the
® ®
Adobe Photoshop Elements folder. To begin installation, double-click the installer icon
follow the on-screen instructions.
6. Plug the other end of the power cord into an electrical outlet.
c
Caution:
It is not possible to change the AC adapter's input or output voltage. If the label on
the AC adapter does not show the correct voltage, contact your dealer. Do not plug
in the power cord.
Whenever you unplug the scanner, wait at least 10 seconds before plugging it back
in. Rapidly plugging and unplugging the scanner can damage it.
Note:
This scanner does not have a power button. It turns on when you connect the AC adapter and
then plug in the power cord.
The scanner turns on and begins to warm up. The ]
Start button blinks green until the scanner finishes
warming up, then stops blinking and stays green.
This indicates that the scanner is ready for use.
Note:
The ] Start button light turns off if you do not use the scanner for about 15 minutes.
7. Connect the square connector on the USB cable to the USB port on the back of the scanner.
Then connect the other end of the USB cable to any available USB port on your computer.
USB port
Note:
Do not connect the scanner through any hubs.
To turn off the scanner, unplug the power cord from the electrical outlet.
4xxxxxx Rev.0 4xxxxxx
1-F M 1-F
Notes
contain important
information and useful tips on
the operation of your scanner.
® ®
Photoshop Elements icon that appears on
. Then
Plug this end of the USB cable into
your computer.
Rev.0 4xxxxxx Rev.0
Y 1-F BK