Bosch BT-ANGLEEXACT 2 Original Instructions Manual page 20

20 | English
The screwdriving system enables screwdriving signals to be
transmitted wirelessly using Bluetooth® technology. OK and
NOK signals (screw connection OK/not OK) from the indus-
trial cordless screwdrivers in the BT-EXACT and BT-ANGLE
EXACT series are transmitted to the EXAConnecT access
point. Without the EXAConnecT access point, screwdrivers
in the BT-EXACT and BT-ANGLE EXACT series cannot be put
into operation – the screwdrivers are locked when they are
delivered and can only be unlocked using the EXAConnecT
access point.
Read and observe the operating instructions for the EXACon-
necT access point. First put the EXAConnecT access point
into operation.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Application tool (e. g. nut driver bit)
(2) Tool holder
(3) Angled screw head
(4) Open-ended spanner with width across flats of
27 mm
(5) Spanner flat on angled head flange
(6) Open-ended spanner with width across flats of
22 mm
(7) Slider for preselecting the torque
(8) Hanging hook
(9) LED indicator for screwdriving applications
Technical data
BT-EXACT
industrial cordless screwdriver
Article number
Torque adjustment range
No-load speed n
0
Rated voltage
Direction of rotation
Tool holder
Data interface (wireless)
Maximum transmission range
Weight according to EPTA-Procedure
01:2014
Recommended ambient temperature during
charging
Permitted ambient temperature during oper-
B)
ation and during storage
Operating frequency range
Max. transmission power
Protection rating
A) measured at 20 - 25 °C with battery 2 607 335 681.
B) Limited performance at temperatures <0 °C
1 609 92A 5P3 | (06.04.2020)
(10) Bluetooth® LED indicator
(11) Battery charge LED indicator
(12) On/off switch
(13) Rotational direction switch
(14) Attachment slots for hanging hook
(15) LED holder
(16) Spanner flat on the cap nut
(17) Battery release button
(18) Battery with contact APT
(19) Marking ring
(20) Worklight
(21) Battery Charger
(22) Mains plug
(23) Green LED indicator on the battery charger
(24) Red LED indicator on the battery charger
(25) Quick-change chuck
(26) Adjustment tool
(27) Hex key
(28) Setting disc
(29) Spring ring
(30) Cavity in the housing shell
(31) Handle (insulated gripping surface)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of ac-
cessories in our accessories range.
2
0 602 491 433 0 602 491 437 0 602 491 431 0 602 491 439
Nm 0.5–2
-1 A)
min 600
V 9.6
QC 1/4" QC
Bluetooth® wireless technology class 2 (specification 1.2)
m 10
kg 0.80
°C 0 to +35 0 to +35
°C –20 to +50 –20 to +50
MHz 2402–2480 2402–2480
mW 0.5
IP 20
4 6
1–4 1–6
A) A)
900 600
9.6 9.6
1/4" QC 1/4" QC
10 10
0.80 0.80
0 to +35
–20 to +50 –20 to +50
2402–2480 2402–2480
0.5 0.5
IP 20 IP 20
Bosch Power Tools
7
1.5–7
A)
150
9.6
1/4"
10
0.80
0 to +35
0.5
IP 20