Table of Contents
Advertisement
3. Connect the router antenna.
•
The following figure shows how to
install the 1P184-DP-BR0-RE
antennas.
•
Route router antennas through the
two 3G/4G cable glands
respectively and connect them to
the MOBILE1 and MOBILE2 ports
on the router. If there is only one
antenna, route it through either one
of 3G/4G cable glands and
connect it to the MOBILE1 port on
the router.
•
Route antennas through the
enclosure base, put them in the
antenna support on the upper left
side of the enclosure, and secure
screws for the antenna base.
4. Use clips to secure the router antenna cable.
•
The following figure shows
how to secure one antenna
using clips.
•
Antenna clips and M4 screw
assemblies are supplied
with the combiner box.
10
Advertisement
Table of Contents
