Page 1
Projector ED-27X User's Manual (detailed) Operating Guide – Technical Example of PC signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9...
Page 2
Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b)
Page 3
Connection to the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. COMPUTER IN1 COMPUTER IN2/MONITOR OUT D-sub 15pin mini shrink jack • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) •...
Page 4
Connection to the ports (continued) CONTROL D-sub 9pin plug 9 8 7 • About the details of RS-232C communication, 5 4 3 2 1 please refer to the next chapter. Signal Signal Signal (No connection) (No connection) Ground (No connection) (No connection)
Page 5
RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer. For details of RS-232C commands, refer to RS-232C Communication command table (8). Connection Turn off the projector and the computer. Connect the projector's CONTROL port and the computer's RS-232C port with a RS-232C cable (cross).
RS-232C Communication (continued) Communication settings 1. Protocol 19200bps,8N1 2. Command format ("h" shows hexadecimal) Byte Number Data Command Header Data Header Setting Action Type flag code size code Packet Action <SET>Change setting to desired value [(bL)(bH)] (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) by [(cL)(cH)].
RS-232C Communication (continued) 3. Response code / Error code ("h" shows hexadecimal) (1) ACK reply : 06h When the projector receives the Set, Increment, Decrement or Execute command correctly, the projector changes the setting data for the specified item by [Type], and it returns the code. (2) NAK reply : 15h When the projector cannot understand the received command, the projector returns the error code.
Page 8
RS-232C Communication command table RS-232C Communication command table Command Data Names Operation Type Header Action Type Setting Code Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00 00 60 01 00...
Page 9
RS-232C Communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 89 D2 02 00 03 20 00 00 BRIGHTNESS Increment BE EF 06 00 EF D2 04 00 03 20 00 00 BE EF 06 00 3E D3...
Page 10
RS-232C Communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 C4 FE 02 00 95 30 00 00 User Gamma Point 6 Increment BE EF 06 00 A2 FE 04 00 95 30 00 00 Decrement...
Page 11
RS-232C Communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 40 F5 02 00 B6 30 00 00 COLOR TEMP Increment BE EF 06 00 26 F5 04 00 B6 30 00 00 OFFSET G Decrement...
RS-232C Communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 F1 82 02 00 01 21 00 00 H POSITION Increment BE EF 06 00 97 82 04 00 01 21 00 00 BE EF 06 00...
Page 13
RS-232C Communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code AUTO BE EF 06 00 CE D6 01 00 10 20 03 00 COMPUTER IN1 SYNC ON G OFF BE EF 06 00 5E D7 01 00 10 20 02 00...
Page 14
RS-232C Communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code ENGLISH BE EF 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 06 00 67 D2 01 00 05 30 01 00 DEUTSCH BE EF 06 00...
Page 15
RS-232C Communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code MyScreen BE EF 06 00 FB CA 01 00 00 30 20 00 ORIGINAL BE EF 06 00 FB E2 01 00 00 30 40 00 BLUE BE EF 06 00...
Page 16
RS-232C Communication command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 B6 D6 01 00 16 20 00 00 AUTO SEARCH BE EF 06 00 26 D7 01 00 16 20 01 00 BE EF 06 00 85 D6...