Using The Time And Timer Function - Bosch OptiMUM MUMPCV4S12 Instruction Manual

en

Using the time and timer function

Operating the appliance
4. Plug the mains plug into the mains.
"OptiMUM" appears on the display.
5. Set the rotary switch to the required
setting (X "Recommended speeds"
see page 25). "TIME" appears on
the display and the elapsed processing
duration is displayed in minutes and
seconds.
Note: If the duration is 60 minutes or more,
hours are also displayed: "1:01:30".
6. Process the ingredients until you
achieve the required result.
7. Turn the rotary switch to y. Wait
until the drive comes to a standstill.
Disconnect the mains plug.
8. Press the release button and raise
the swivel arm to the stop.
9. Turn the bowl clockwise until it can be
raised. Remove the bowl.
10. Press both eject buttons until the tool is
released. Take the tool out of the drive.
11. Take the cover off the drive.
12. Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 33
Note: Please also use our application
examples to familiarise yourself with
your new appliance and its functions.
X "Recipes" see page 33
Adding more ingredients
More ingredients can also be added during
processing.
X Fig. G
■ While the appliance is running, carefully
add more ingredients through the filling
shaft in the cover.
W Risk of injury!
While operating the appliance, never reach
into the bowl or filling shaft with your hands.
Do not insert any objects (e.g. wooden
spoon) into the bowl or filling shaft.
X Image sequence H
1. To add larger quantities or ingredients,
turn the rotary switch to y. Wait until
the drive comes to a standstill.
28
2. Press the release button and raise
the swivel arm to the stop.
3. Add the ingredients directly to the bowl.
Press the release button and push the
swivel arm down until it locks into place.
"OptiMUM" appears on the display.
Continue processing your ingredients.
Using the time and
timer function
The appliance features a time and timer
function. The following functions are
available:
"TIME" function
Display of the elapsed processing duration
(standard setting). The "TIME" function
starts automatically once the processing of
food has been started.
Notes:
– Press button A briefly during processing
to switch on the "TIMER" function.
– Hold button A down during processing
to reset the display to "00:00".
"TIMER" function
Setting of a required duration. Once the
duration has elapsed, an acoustic signal
will sound and processing will stop.
The function may also be used without
processing food (e.g. for boiling or resting
times of food).
X Image sequence I
1. Prepare the appliance. Add ingredients.
2. Plug the mains plug into the mains.
"OptiMUM" appears on the display.
3. Press button A. "00:00" appears on the
display.
4. Set the required processing duration using
button + or -. The values will change
faster if the respective button is pressed
and held down. The set processing
duration will remain saved for approx. 5
minutes.
5. Set the rotary switch to the required setting.
6. The remaining duration will be shown
on the display and the countdown will
continue.