Huawei SUN2000-2KTL-L1 User Manual page 31

SUN2000-(2KTL-6KTL)-L1
User Manual
● To prevent dust inhalation or contact with eyes, wear safety goggles and an
● Wipe away any dust in or around the holes and measure the hole distances. If
● Level the head of the expansion sleeve with the concrete wall after removing
● Loosen the nut, spring washer, and flat washer of the expansion bolt at the
Figure 4-9 Installing expansion bolts
Step 3 (Optional) Install the locking screw for the DC switch.
Figure 4-10 Installing a locking screw for the DC switch
Step 4 Install the SUN2000 on the mounting bracket.
Step 5 Tighten the nuts.
Issue 03 (2020-07-20)
NO TICE
anti-dust mask when drilling holes.
the holes are inaccurately positioned, drill holes again.
the nut, spring washer, and flat washer. Otherwise, the mounting bracket will
not be securely installed on the wall.
bottom.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
25