X3: Ethernet Interface; Fig. 7-15: Ethernet Interface; Fig. 7-16: Pin Assignment Of The Ethernet Interface X3 - Bosch Rexroth IndraControl VEH 30.1 Project Planning Manual

7-10
Interfaces of the IndraControl VEH 30.1

X3: Ethernet Interface

The embedded terminal can be connected with an Ethernet network via
an Ethernet interface.
RJ45 female connector, 8-pin
Type:
Cable length:
Cable type:
Transmission rate:
Fig. 7-15: Ethernet interface
Ethernet RJ45
8
1
Fig. 7-16: Pin assignment of the Ethernet interface X3
The configuration of the Ethernet interfaces is described in chapter 9,
"Software".
IndraControl VEH 30.1
Ethernet 10Base T / 100Base X
Max. 100 m
Shielded, twisted pair
10 or 100 Mbits/s
Ethernet
max. 100 m
1
2
3
4
5
6
7
8
DOK-SUPPL*-VEH*30.1***-PR02-EN-P
To the network