Advertisement
Risk of Injury/Risque de Blessure
• Do not look directly at the operating lamp for any period of time, this may cause eye injury./
Ne pas regarder directement l'ampoule lorsqu'elle est allumée pendant une période prolongée,
ceci peut causer des blessures oculaires.
Please Note/Attention
• This device complies with Part 18 of the FCC Rules. This product may cause interference to radio equipment
and should not be installed near maritime safety communications equipment or other critical navigation or
communication equipment operating between 0.45-30 MHz.
• This Class [A] RFLD complies with the Canadian standard ICES-005 (*)./
CeDEFR de la classe [A] est conforme à la NMB-005 (*) du Canada.
• Modifying or opening the system will void the warranty.
• Before resetting the ballast, please allow 15 minutes for the lamp to cool down.
• When your system cannot be ignited, please check the LED indicator first to diagnose the problem and find
a solution. Check if all the connections are correct. If the lamp is still off, please contact the manufacturer or
distributor.
Wiring Diagram
3-Phase Y
*
*
N
L3
L2
L1
Driver
Driver
Driver
REPEAT FOR ENTIRE CIRCUIT BALANCING OUT EACH PHASE
*White = Neutral or Line 2
Light Dispersion
Open Type Reflector
Vertical Plane Through Horizontal Angles (0-180°)
3-Phase ∆
*
Driver
Driver Driver
Cylindrical Type Reflector
Vertical Plane Through Horizontal Angles (0-180°)
2
Advertisement
