Sharp AQUOS LC-43N6100N Quick Start Manual page 13

STEP 3. Esta lish a net ork connection
>
1.Press the button on the remote control and then press to enter the Settings menu.
2.Select Net ork Net ork Con guration.
TV JACK
IP Sharer (Router)
External Modem
(with DHCP server)
(ADSL / VDSL / Cable TV)
LAN
LAN Cable LAN Cable Modem Cable
Esta lish a ired net ork connection
Automaticall o tain an IP address
1.Select Ethernet. The TV will automatically obtain an IP address and connect to the network.
NOTE: The default o tion of IP Setting Mode is DHCP.
2.If the connection fails then "Disconnected" will display for the Ethernet status. Retry or select Manual to input the information again.
Manuall enter the IP address
1.Select Manual.
2.Enter the IP Address, Subnet Mask, Default Gateway, Preferred DNS and Alternative DNS in the menu. Next, select Connect.
10