Installation Procedure Used In The Imageware Accounting Manager (Will Be Called As Iwam) Environment - Canon imagePRESS 1135 Series Service Manual

Installation Procedure used in the imageWARE Accounting Manager (will be called as iWAM) environment

1) Make sure that "ID00000001 - ID00001000" is created on [Additional functions] > [System
Settings] > [Dept. ID Management] > [Register ID/Password] / [Page Totals]. (If "1" is entered as
the first number on the Service Mode ; COPIER > FUNCTION > INSTALL > CARD).
2) Press the reset key, and exit from [Additional Functions].
CAUTION :
Select [Additional Functions] > [System Settings] > [System Manager Settings],
and it is necessary to register in [System Manager ID] and [System Password], or
the work in the iWAM 'Registration of card to the device' can not be executed.
5) Select [Additional Functions] > [System Settings] > [System Manager Settings], and enter your
chosen number to [System Manager ID] and [System Password].
6) Press the reset key, and exit from [Additional Functions].
9
Installation > Card Reader-C1 > Installation Procedure used in the imageWARE Accounting Manager (will be called as iWAM) environment
3) Select [Additional Functions] > [System Settings] > [Network Settings] > [TCP/IP Settings] > [IPv4]
> [IP Address Settings], and set the [IP Address], [Getaway Address], [Subnet Mask] according to
the user environment.
4) Press the reset key, and exit from [Additional Functions].
7) Turn OFF the main power according to the shut down sequence.
9 Installation > Card Reader-C1 > Installation Procedure used in the imageWARE Accounting Manager (will be called as iWAM) environment
9-74
9-74