Troubleshooting - Asus FX-D1162 Quick Start Manual

Troubleshooting

Problem
The POWER LED does not light up.
The STATUS LED does not light
up even after a network device is
connected to the port.
8
Quick Start Guide
Book FX-D1162.indb 8
Solution
Check if the power cable is properly
connected to the switch and to a power
outlet with a correct voltage output.
Check if the Ethernet cable is properly
connected to the switch and to the
network device.
Ensure that the switch and your network
device are powered on.
Check if the Ethernet cable meets your
network requirements. To connect a
gigabit switch port, you need a Category
5 cable to get gigabit transfer speed.
5/8/09 6:26:18 PM