Siemens SIMATIC NET ANT795-6MN Compact Operating Instructions page 37

Procedure
Remove the protective caps from the N connector of the antenna and
screw down the flexible connecting cable onto the N connector. The
tightening torque at the N connector is 1.7 Nm.
Note
Installation outdoors
Protect the connectors from environmental influences (e.g. with self-
vulcanizing adhesive tape or a shrink-on hose).
Note
Keep the protective caps
Keep protective caps taken out for later use.
Kompaktbetriebsanleitung ANT795-6MN
A5E01116919B-09
English
37