Philips 2net Gen 2 User Manual page 27

medical device might have its own "pairing" button or
function. You may need to press that button or activate that
function for the device to work with the Hub. Refer to your
medical device user manual for "pairing" instructions. Follow
the instructions provided by the manufacturer of your
medical device to "pair" your medical device to the Hub.
If, after following the pairing instructions, your Hub is still
not receiving readings, contact the service provider that
supplied your Hub.
Hub Not Ready
If the reading light
receive data from medical devices. Do not unplug the Hub
at this time. Your Hub may be processing an update. If this
condition persists for more than 5 minutes, your Hub will
automatically restart. No user intervention is needed. If you
unplug the Hub during an update, just plug it back in and
the update will resume at a later time.
• If your Hub does not return to the ready state (the
reading light is
the service provider that supplied your Hub.
s
is OFF, your Hub is not ready to
solid GREEN) within 30 minutes, contact
Troubleshooting Tips 23