NEC 8151-79 Built-In FDD User Manual page 15

12.
The interface cable supplied with the floppy disk drive has one protruding end to
prevent wrong cabling. Connect the protruding end of the cable to the floppy disk
drive connector on the motherboard.
13.
Connect the FDD interface cable with its red line (indicating Pin 1) facing the
motherboard to the floppy disk drive.
14.
Connect the mini 4-pin power cable to the floppy disk drive.
15.
Connect the power cable with the DVD-ROM interface cable.
16.
Install the hard disk drive that you have removed, and secure it with the screws.
17.
Connect the power cable with the hard disk drive interface cable.
The installation is complete.
15
- -