VX6 / VX7 Adapter Cable
An adapter cable is available to attach the Thor VM2 to a vehicle previously equipped with a VX6/VX7 DC power cable. The
adapter cable has a 5-pin connector to match with the VX6/VX7 power supply cable on one end and a 6-pin connector to match
to the Thor VM2 on the other.
Caution:
Because the Thor supports 10-60 VDC power input, verify input voltages before using this adapter cable with an
existing VX6 or VX7 power connection installation.
When this adapter cable is used, there is no provision for an ignition switch input. Therefore the vehicle ignition monitoring
function is not available when using this cable.
1. To Thor VM2
2. To VX6/VX7 Power Supply
Cable
4-7