Table of Contents
Advertisement
11. Video Synchronized Recording
By recording a song played on the Disklavier synchronized
with the video recording, later on, you can enjoy piano play-
back with the video. First set up the camcorder and the
Disklavier, and then start recording by following the proce-
dures below.
Setting Up the Camcorder and the Disklavier
1, Hook up a camcorder to the I/O Center.
2, Tap
(set up) on in the [Main] screen,
and then
(SYNC).
3, Tap
synchronization on.
Each time you tap on
synchronization turns on and off alternately.
4, Tap on the desired option ([SyncLevel] or [Offset]), and
then press
to adjust its value.
To cancel the adjustment, press
5, Press
(select button) to set the value.
Starting Video Synchronized Recording
1, Press
repeatedly until the [Main] screen appers, and
then tap on
2, Start recording on the camcorder.
3, Confirm that [Rec Wait] appears in the information area,
and then press
to start recording.
4, Start playing the Disklavier.
5, After playing the Disklavier, press
recording.
6, Stop recording on the camcorder.
on to turn the video
, the video
in the [Main] screen.
to stop
MHB23 MKIV/PRO DIOV1.05, SCV.1.01 PAGE.29
Video Synchronized Playback
1, Perform the video synchronized recording in advance.
Note: Be sure to rewind the video cassette to
locate the beginning of the recording.
2, Make sure that the video synchronization is on.
3, Select the desired song corresponding to the video if
necessary.
4, Turn down the volume completely on the camcorder.
Note: Although noises (synchronizing signal)
are heard from the camcorder•fs speaker when
the volume is not turned down completely, this
is not a malfunction.
5, Start playback on the camcorder.
The Disklavier starts playback as well.
Note: You cannot change the playback tempo during
video synchronized playback.
Hooking Up AV Equipment
SYNC IN
SYNC OUT
Hide quick links:
Advertisement
Table of Contents
