Description Of The Appliance; Operation - Bosch MFQ4 GB Series Instruction Manual

This instruction manual refers to various
models.

Description of the appliance

X Fig. A
Base unit
1 Cable clip (with some models)
2 Power cord
3 Ejector button
For removing the tools
4 Switch
For switching the appliance on and off
and adjusting the operating speed.
0 = switched off
1 = lowest speed
5 = highest speed
M = instantaneous switching (highest
speed), press left and hold
5 Openings for inserting
the tools with closure
Automatically closed when pushing
open the rear aperture.
6 "Fine Creamer" beating whisks
7 Unlocking buttons
For removing accessories from the rear
aperture.
8 Self-closing rear aperture
For inserting accessories, e.g. high-
speed hand blender.
9 Kneading hooks
With some models:
10 Blender jug
11 High-speed hand blender
Plastic or stainless steel
12 Universal cutter
If an accessory is not supplied as standard,
it can be ordered from customer service.
Accessories
High-speed hand blender
Plastic
Stainless steel
Universal cutter
When using accessories, please follow
the separate instruction manual for these
accessories.

Operation

Before using for the first time, clean the
base unit and tools.
The closed shape of the housing means
that the appliance runs especially quietly. It
nevertheless reaches full motor power and
speed.
Beating whisks
The beating whisks can be used to whisk
egg whites or beat cream. They can also
be used to make light dough, e.g. sponge
mixture, cake mixture, pancake batter.
They should not be used to make
mayonnaise. To make mayonnaise, use the
high-speed hand blender.
Kneading hooks
The kneading hooks can be used to make
different types of dough, e.g yeast dough,
dough for pizzas or bread, pastry for strudel
or shortcrust pastry.
The maximum processing quantity is
500 g flour and ingredients.
Always observe the maximum quantities
and processing times in the table.
X Fig. C
X Fig. B
1. Completely unwind the power cable.
2. Insert the required pair of tools in the
3. Insert the mains plug.
4. Insert the tools in the receptacle and
Order no.
00653478
– Level 1, 2: for working in and mixing in.
00653480
– Level 3, 4, 5: for kneading and beating.
00574755
– Instantaneous switching M: for mixing
5. Move the mixer to and fro in the bowl
Description of the appliance
apertures and press on the tools until
they engage.
a. Note the shape of the plastic parts
on the tools to avoid mixing them
up.
b. Insert tools one after the other to
stop them from getting caught!
switch the appliance on at the required
level.
or beating ingredients quickly.
while mixing. Never reach into the
rotating tools.
en
7