Sharp MD-DS77 Operation Manual page 57

Notes:
The equalizer and surround effects can be used
at the same time. To toggle the menu between
equalizer and surround, hold down the SOUND
button during the setting.
When setting the sound field or bass, press the
GROUP button to switch the menu to equalizer
or surround.
(*1) To save your equalizer setting
1) In step (3) of "To set the equalizer", select "EQ-
USER1".
2) Press the GROUP button for 2 seconds or more.
The "EQ-USER1" setting screen appears.
3) Slide the button to
to select bass, mid-range or treble.
4) Slide the volume button to the
repeatedly to adjust the level.
You can select from 3 levels.
5) Repeat steps 3) and 4) to select the level.
6) Press the SOUND button to save the setting.
Repeat steps 1) to 6) to set "EQ-USER2".
To cancel the operation:
Press the button.
Interruption or inactivity of about 90 seconds
cancel the setting. The setting is not
changed.
Changing the setting:
Perform "To save your equalizer setting" from step 1).
To interrupt playback:
Press the
back.
Press the
To stop playback:
Press the
In about 2 minutes after playback is stopped or paused
and left as it is, the unit will be automatically turned off.
To turn off the power:
Press the
or repeatedly
or
VOL VOL
button on the remote control during play-
button again to resume playback.
button during playback.
button while playback is stopped.
HOLD FUNCTION (page 23)
To avoid operations by accidentally pressing the
buttons, use the hold function.
Main Unit:
Hold down the
:OFF-HOLD
more. (You will hear one beep.)
Then "HOLD on" will appear on the remote control.
To cancel the hold mode, press the
for 2 seconds or more. (You will hear two beeps.)
Then "HOLD off" will appear on the remote control.
Remote Control Unit:
To put the unit in the malfunction prevention state,
move the switch in the direction of the arrow.
HOLD
To cancel the hold mode, return the
its original position.
button for 2 seconds or
button
:OFF-HOLD
switch to
HOLD
MD-DS77
57