NEC NP610S Faq

Hide thumbs Also See for NP610S:

Download this manual

FAQ: Cleaning Smartboard Filters

PURPOSE: The purpose of this procedure is to demonstrate clean and reset the filters for Smartboard

projector NEC NP610S.

OPERATING SYSTEM: Windows 7 is demonstrated in this procedure, but similar steps can be taken with

Windows XP and Vista.

PROCESS

STEP

STEP 1:

Locate

filter

location on

the rear of

the

projector.

STEP 2:

Locate

filter

location on

the side of

the

projector.

Remove filter by

pressing the tab

located on the top of

the filter frame.

Remove filter by

pressing the tab

located on the top of

the filter frame.

REFERENCE IMAGE

12/10/2012

Rev 1

Page 1 Rev 1 PURPOSE: The purpose of this procedure is to demonstrate clean and reset the filters for Smartboard projector NEC NP610S. OPERATING SYSTEM: Windows 7 is demonstrated in this procedure, but similar steps can be taken with Windows XP and Vista.
Page 2 12/10/2012 FAQ: Cleaning Smartboard Filters Rev 1 STEP 3: Remove filters from frames and clean with water. Do NOT USE soap. Soap damage the filters...
Page 3 12/10/2012 FAQ: Cleaning Smartboard Filters Rev 1 Step 4: Dry Pat dry with Filters paper towels Let filters LET DRY OVERNIGHT! completely dry. Reinstall filters Step 5: Push • Reset “MENU” Clean Filter Hours Warning...
Page 4 12/10/2012 FAQ: Cleaning Smartboard Filters Rev 1 Right arrow • until reset menu shows Press the • down arrow to Clear Filter Hours Press • ENTER to select Left arrow • to YES Press • ENTER, then EXIT button twice...