Preparations; Attaching The Cdx-36150 Recorder To The Camera; Removing The Cdx-36150 Recorder - Canon CDX-36150 Manual

Codex recorder for canon eos c700
Hide thumbs Also See for CDX-36150:
Table of Contents

Advertisement

Preparations

This section explains how to attach the CDX-36150 Recorder to the EOS C700 / EOS C700 PL / EOS C700 GS
PL camera and remove it, and insert recording media (Codex Capture Drive 2.0) to the recorder and initialize
recording media.
For safety and maintenance instructions and detailed information about the recorder, refer to the CDX-36150
Recorder's Getting Started Guide. ? indicates a reference to the relevant section in the camera's
Instruction Manual (PDF file).

Attaching the CDX-36150 Recorder to the Camera

Q
1 Press the
button to turn off the camera.
2 Remove the battery adapter that comes attached to the
camera.
?
Removing an Extension Module
3 Attach the recorder to the camera.
?
Installing an Extension Module
• Follow steps 1 to 4 in the procedure to attach the recorder in
the same way explained for attaching a battery adapter.
• Pull out the locking lever on the recorder to attach it to the
camera.
4 Attach the reinforcement plate (supplied with the camera)
to the recorder.
5 Using the hex wrenches supplied with the camera, fasten
the 6 fixation screws shown in the illustration (4 on top,
2 on the bottom) to secure the recorder in place.
• Use the 1/4" (0.64 cm) wrench for the 2 top plate screws
closer to the front of the camera and the M4 wrench for the
rest of the screws and bolts (top/bottom plates).

Removing the CDX-36150 Recorder

Q
1 Press the
button to turn off the camera.
2 Remove all power sources connected to the recorder
(DC IN and battery).
3 Use the hex wrenches supplied with the camera to
remove the 6 screws shown in the illustration.
• Use the 1/4" (0.64 cm) wrench for the 2 top plate screws
closer to the front of the camera and the M4 wrench for the
rest of the screws and bolts (top/bottom plates).
4 Remove the reinforcement plate from the recorder.
5 Remove the recorder.
?
Removing an Extension Module
• Follow the procedure to remove the recorder in the same
way explained for removing the battery adapter.
• Pull out the locking lever on the recorder to remove it from
the camera.
Preparations
3

Advertisement

Table of Contents
loading

Table of Contents