Sharp SV-4328 Maintenance Manual page 32

PRECISION MACHINE TOOLS
2) Lubrication System Diagram
Number
1.
2.
3.
4.
caution：
1) Value of the input source current has to be the same as the one on the plague.
2) The wiring has to follow the instructions on the plaque to avoid damaging the oil pump.
3) Ground the ground wire.
4) A filter is installed on the inlet of the oil tank. Do not contaminate the manifold block
components.
5) Wash the filter whenever it is contaminated to maintain its function.
6) Do not drop oil, water or other onto the control circuit, or the control circuit may be
damaged.
7) Pay attention to the oil level when filling up the oil.
Model
PA6
PB6
PKD6
PH601
Name
Pipe cape
Pipe
3-way pipe
Right angle connector
32
Ver 2 Maintenance Manual
Quantity
3
3
1
2