Advertisement
GETTING S TARTED
1
SET THE TIME.
A. Remove the plastic spacer from the crown.
B. Gently pull crown out to its outermost position
C. Rotate the crown to the correct time.
D. Press the crown to return it to its normal position
NOTE:
If you are storing the watch make sure to pull the crown out to its
outermost position
.
2
4
.
2
1
1
2
WARNING:
Do not attempt to change
the batteries yourself. Opening the watch
case will void your warranty. Using an
incorrect battery may cause the watch to
overheat or catch fire.
2
CHARGE THE WATCH.
Charge the watch for at least two hours
NOTE:
The first time you charge the watch, the display might be blank. After you
set up the watch, the charging icon
Before you charge your watch, disconnect the charger from power and
.
thoroughly wipe the charger and watch contact pins with a soft, lint-free cloth.
If needed, you may dampen the cloth with a small amount of isopropyl rubbing
alcohol. Never use soap or any chemicals other than isopropyl rubbing alcohol to
clean the contact pins for the watch or charger.
1
,
,
.
1
2
3
is displayed while the watch charges.
2
3
5
Advertisement
