D-Link DWL-G122 Quick Installation Manual page 9

SSID: The Service Set Identifier is the name as si
SSID setting is set to default. Make changes here to match the SSID on existing Wireless
Router or Access Point.
Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used for peer-
to-peer networking.
Data Encryption: The default setting is set to Disabled. The adapter supports WEP when
encryption is enabled.
Authentication: You can specify the authentication mode for the wireless network. The
default setting is set to Open Authentication.
Key Length: When encryption is enabled, you will have the option to specify the level and
key format of the encryption used. Select the appropriate Key Index : 1-4 and enter ACSII or
hexadecimal digits in the appropriate field.
Appendix (cont.)
 gned to the wireless network. The factory