Saving, Requesting And Deleting Measurements - Silvercrest 326870 Instructions For Use And Safety Notes

It is important that you consult your doctor at regular intervals.
Your doctor will give you your particular values for normal
blood pressure as well as the value for when your blood
pressure is classified as dangerous.
The bar chart on the display and the scale on the device
state which range the blood pressure measured is in.
If the values for systolic and diastolic pressure are in two
different JNC ranges (e.g. systolic in the Stage 1 Hyperten-
sion range and diastolic pressure in the normal range) the
graphic JNC classification on the unit indicates the higher
range (Stage 1 Hypertension in the example described).
The results of each successful measurement are saved together
with the date and time. If there are over 30 measurement
values, the oldest measurement value will be overwritten.
6870_silv_Blutdruckmessgeraet_Content_US.indd 43
Saving, requesting and deleting
measurements
Press the SET button
to select the desired user memory
7
your choice using the START / STOP button
Press the memory button M
value "A" of all saved measurements pertaining to the
user memory. Press the memory button M
display the average value of the last 7 days for the
morning measurement. (Morning: 5.00 am – 9.00 am,
display "AM"). Press the memory button M
to display the average value of the last 7 days for the
evening measurement. (Evening: 6 pm – 8 pm, display
. Press the function buttons -/+
6
to display the average
5
... . Confirm
.
8
again to
5
again
5
US-EN 43
04.07.19 09:1