Table of Contents
Advertisement
Maintenance
Ensure to unplug the unit from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.
Hints and Tips
Problem
No Sound
Static Sound
Sound is distorted
Desired station not found
The display shows "Service
N/A"
The display is blank
Poor FM reception
If any anomalies are encountered, unplug the unit from
the mains socket and reconnect again.
Adjust the volume control, it may not be turned up.
The MUTE function may be active, press the MUTE button to
disable the function.
Signal reception too low. Adjust the aerial or move the unit
to a stronger signal location.
Volume is too high. Adjust the volume control.
Weak signal. Use the Manual Tune function.
No DAB coverage in your area or poor reception. Adjust the
position of the aerial. Fully extend the DAB+/FM aerial.
This may occur if the broadcaster changes the label of a
service or removes a label while tuned. The unit will try to
retune or perform a scan.
Make sure the DAB+/FM aerial wire is fully extended.
Electrical interference in your home can cause poor
reception. Move the unit away from them (especially those
with motors and transformers).
Solution
GB
21
Advertisement
Table of Contents
