Table of Contents
Advertisement
26
Troubleshooting
Troubleshooting
General
Problem
The unit does not work
properly.
No Power.
No sound.
4
Radio stations cannot be
tuned in properly.
The remote control does
not work properly.
The unit does not
connect with Bluetooth
device
y Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
y Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
y Previous setting may not be saved when device power is shut off.
y The power cord is not plugged in. Plug in the power cord.
y Check whether electricity failed.
Check the condition by operating other electronic devices.
y Check whether you select right function.
Press function button and check the selected function.
y The antenna is positioned or connected poorly.
Connect the antenna securely.
y The signal strength of the radio station is too weak.
Tune to the station manually.
y No stations have been preset or preset stations have been cleared (when tuning
by scanning preset channels).
Preset some radio stations, see page 24 for details.
y The remote control is too far from the unit.
Operate the remote control within about 7 m (23 feet).
y There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
y The batteries in the remote control are exhausted.
Replace the batteries with new ones.
y Turn off the Bluetooth connection lock function. (Page 21)
y Turn off and on again the Bluetooth device. (Page 19)
Cause & Solution
Advertisement
Table of Contents
