Troubleshooting; Cannot Discover The Device; Network Configuration; Checking System Health - Motorola AVIGILON ACC VMA-RPO-4P2 User Manual

Troubleshooting

Cannot Discover the Device

If you cannot discover the device using File Explorer (Windows) or Finder (Macintosh) during the hardware
installation and it is connected to your network, try the following:
Access the appliance from your web browser using the URL https:// VMA-RPO-4Px<serial number>
l
Use the Address Resolution Protocol (ARP) to determine the IP address for the device:
l
1. Locate and copy down the MAC Address (MAC) listed on the Serial Number Tag for reference.
2. Open a Command Prompt window and enter the following command:
arp -a
3. Scroll through the response and look for the IP address corresponding to the MAC address.
Discover the DHCP-assigned IP address from the ACC Client software:
l
1. Download and install and open the ACC Client software on to the configuration laptop. For
information see
2. Log into the site that uses this naming convention: VMA-PRO-4Px<serial number>.
Note: The username and password for the Web Interface application is separate from
the administrator username and password for the ACC Server.
3. Display the server Setup tab.
At the top of the window, the recorder IP address is displayed.
4. Open a web browser and enter the IP address in this format: https://<IP address>.
5. Continue the remaining steps for installing the recorder.

Network Configuration

By default, the ACC ES HD Recorder acquires an IP address on the network through DHCP. If you need to
set up the ACC ES HD Recorder to use a static IP address or any specific network configuration, see
theConnecting the Device to Users and Cameras on page 13

Checking System Health

You can check on the health of the system components in the Site Health in the ACC Client software. See
Site Health in the ACC Client User Guide for more information.
Troubleshooting
Installing and Starting the ACC Client on page 17.
for more information.
30