Before Starting Engine - Hitachi Zaxis 17U-5A Operator's Manual

Before Starting Engine

1. Confirm that pilot control shut-off lever (1) is in the LOCK
position.
2. Confirm that all control levers are placed in neutral.
3. Check indicator bulbs as follows:
Turn key switch to the ON position. All indicator lights
and warning lamps will come on. They will stay on for
approximately 2 seconds, except for alternator (3) and
engine oil pressure (4) indicator, which will continue to
stay on further.
IMPORTANT: The monitor panel indicates the machine
operating conditions. If the machine is operated with
an indicator bulb or a warning lamp burned out, the
alarm will not be displayed even if any abnormality
occurs on the machine. Accordingly, in case any of
the indicator bulbs or the warning lamps do not
come ON, immediately contact your authorized
dealer for repair. If any of alternator (3), or engine oil
pressure (4) indicator fails to light after indicator light
check is completed, the machine may have trouble.
Immediately contact your authorized dealer for repair.
4. Adjust the seat to allow full pedal and control levers
stroke with operator's back against the backrest. Fasten
the seat belt.
f
NOTE: The monitor surface is a resin product. When the
surface becomes dusty, lightly wipe the surface with a wet
cloth. Never use an organic solvent.
OPERATING THE ENGINE
3-2
1
4
MABA-01-002
2
M1M7-01-007
3
M1NC-01-005