Cable Handling; Disconnecting The Probe - GE LOGIQ V2 User Manual

Hide thumbs Also See for LOGIQ V2:

Table of Contents

Getting Started

Cable Handling

Take the following precautions with probe cables:

Do not bend the cable acutely

Avoid crossing cables between probes.

Probes can be disconnected at any time. However, the probe

should not be active when disconnecting the probe.

1. Press the connector locking lever down.

2. Pull the probe connector straight out of the probe port

3. Ensure the cable is free.

4. Be sure that the probe head is clean before placing the

probe in its storage box or wall hanging unit.

LOGIQ V2/LOGIQ V1

Direction 5610736-100 Rev. 9