General Safety - Toshiba MBSWH-150-F3-KK Installation Manual

GENERAL SAFETY

GENERAL SAFETY INSTRUCTIONS
DO NOT attempt to install, operate, maintain or dispose of this equipment until you have read and understood all of the
product safety information and directions that are contained in this manual.
Safety Alert Symbol
The Safety Alert Symbol indicates that a potential personal injury hazard exists. The
symbol is comprised of an equilateral triangle enclosing an exclamation mark.
Signal Words
Listed below are the signal words that are used throughout this manual followed by their descriptions and associated
symbols. When the words DANGER, WARNING, CAUTION and NOTICE are used in this manual they will be followed by
important safety information that must be carefully adhered to.
Warnings in this manual may appear in any of the following ways:
DANGER Danger warning ─ The word DANGER in capital letters preceded by the safety alert symbol indicates
that an imminently hazardous situation exists, and if not avoided will result in loss of life or serious injury
to personnel.
WARNING Warning warning ─ The word WARNING in capital letters preceded by the safety alert symbol indicates
that a potentially hazardous situation exists, and if not avoided may result in loss of life or serious injury
to personnel.
CAUTION
Caution warning ─ The word CAUTION in capital letters preceded by the safety alert symbol indicates
that a potentially hazardous situation exists, and if not avoided may result in minor or moderate injury.
NOTICE Notice warning ─ The word NOTICE in capital letters without the safety alert symbol indicates a poten-
tially hazardous situation exists, and if not avoided may result in equipment and property damage.
Other warning symbols may appear along with the Danger and Warning symbol and are used to specify special hazards.
These warnings describe particular areas where special care and/or procedures are required in order to prevent serious
injury and possible death.
1. Electrical warning ─ The electrical warning symbol is a lighting bolt enclosed in a triangle. The Electrical warn-
MATERIAL - VINYL OR POLYESTER
ing symbol is used to indicate high voltage locations and conditions that may cause serious injury or death if
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - V23 OR EQUIV. the proper precautions are not observed.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
2. Explosion warning ─ The explosion warning symbol is an explosion image enclosed in a triangle. The Explo-
BE UL RECOGNIZED
sion warning symbol is used to indicate locations and conditions where molten exploding parts that may
CAUTION AREA BACKGROUND COLOR: ANSI CAUTION YELLOW
cause serious injury or death if the proper precautions are not observed.
CAUTION AREA TEXT COLOR: ANSI BLACK
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
EQUIPMENT WARNING LABELS
CORNER RADIUS: VENDOR STANDARD
DO NOT attempt to install, operate, maintain or dispose of this equipment until you have read and understood all of the
product warnings and user directions that are contained in this instruction manual.
Shown below are examples of warning labels that may be found attached to the equipment. DO NOT remove or cover
any of the labels. If the labels are damaged or if additional labels are required, contact your TOSHIBA representative for
additional labels.
The following are examples of the warning labels that may be found on the equipment. The labels are there to provide
useful information or to indicate an imminently hazardous situation that may result in serious injury, severe property and
equipment damage, or death if the instructions are not followed.
CAUTION
AREA
TEXT AREA
MBS (Wallmount) Installation - 64523-009
MATERIAL - VINYL OR POLYESTER
TEMPERATURE - MINUS 20 TO 100 deg. C
ADHESIVE - V23 OR EQUIV.
MUST RESIST OIL SOLVENTS
ALL MATERIALS USED MUST
BE UL RECOGNIZED
WARNING AREA BACKGROUND COLOR: ANSI DANGER RED
WARNING AREA TEXT COLOR: ANSI WHITE
TEXT AREA BACKGROUND COLOR: ANSI WHITE
TEXT AREA TEXT COLOR: ANSI BLACK
CORNER RADIUS: VENDOR STANDARD
4.00"
C A U T I O N
Risk of electrical shock.
Remove conduit plate prior to drilling. Metal
chips may fall into breaker orifice and cause
a short circuit.
PN 64821
1.50
DANGER
AC VOLTAGE
This MBS receives power from more
1.50"
than one source. Disconnect all AC
sources before performing any service
or testing inside this unit
0.00
WARNING AREA
TEXT AREA
64819
2