Maintenance
Cleaning the Unit
Ensure the unit is fully removed the cables from the unit before cleaning.
•
To clean the unit, wipe the case with a slightly moist, lint-free cloth.
•
Do not use any cleaning fluids containing alcohol, ammonia or
abrasives.
•
Do not spray aerosol at or near the unit.
Hints and Tips
If a problem does occur, it may often be due to something very minor.
The following table contains various tips. If you require additional
assistance,
for UK, please call our UK Call Centre on 0344 561 1234.
•
for Ireland, please call our Ireland Call Center on 1 890 818 575.
•
Problem
No power.
The unit does not
respond when
pressing any
buttons.
Solution
• The battery may be exhausted. Connect
the USB cable and plug into a USB port of a
computer which is turned on.
• Ensure that the unit is switched on.
• The unit may freeze up during use. Switch the
unit off and then on again to reset the unit.
• Connect the unit with a USB charging cable,
and then the other end to a charging device to
charge and reset the unit.
• Press and hold the
about 8 seconds to reset the unit.
ON/OFF button for
17