HP StorageWorks ESL E Series Replacement

hp
StorageWorks
Caution: Parts can be damaged by
electrostatic discharge. Keep parts in their
containers until needed. Ensure you are
properly grounded when touching static-
sensitive components.
1
Inspect the contents of the kit.
3
Open the back door of the library.
ESL E-Series
Ultrium FC Drive
Replacement
Note: This part is hot-swappable. It is not
necessary to power down the library to
replace this part.
2
From the Home screen, select the Ops button.
From Menu, select the Ops button.
a.
Use the Up and Down buttons to select the
b.
drive, then press the Select button.
Use the Up and Down buttons to change the
c.
drive to off, then press the Select button.
Select Yes to confirm.
d.
Select the Back button to return to Menu.
e.
Verify that the correct drive is powered down.
f.
4
Drive clusters are
numbered from 0 to 5
starting at the top
of the cabinet. In
each drive cluster
the drives are
identified as
follows: top right
is A, top left is B,
bottom right is C,
bottom left is D.
A drawing of
the drive cluster is
located on the
inside of the back door.
0
1
2
3
4
5