KitchenAid 5KCM1208 Use & Care Manual page 9

PRODUCT USAGE
PROGRAMMING THE AUTO SET FEATURE
IMPORTANT: Set the correct time as per the instructions in "Setting the clock" before
using the Auto Set feature.
1
AM
PM
Auto
x
Auto
H Min
Press the Auto button one time.
The Auto indicator light will flash and the
time display will change to the currently set
Auto Set time (12:00 is the default time).
To set the time the Coffee Maker should
begin brewing: Press the H button to set
hour. The hour digits will change with each
press; or press and hold to scroll rapidly.
TIP: To cancel the Auto Set time after programming is complete: Press Auto button
again; or press the
NOTE: Default standard brewing cycle time for a full Carafe (12 cups) is approximately
10-minutes.
USING THE PREVIOUSLY PROGRAMMED AUTO SET TIME
These steps can be followed to save the Auto Set time after following the steps in the
"Programming the Auto Set feature" section.
1
H
Press the Auto button. The Auto indicator
will flash and the time display will show the
previously set Auto time.
AM
PM
Auto
x
Auto
H Min
button.
AM
PM
Auto
x
Auto
Min
2
AM
PM
Auto
x
Auto
H Min
Next, press the Min button to set minute.
The hour setting will stay solid and the
minute setting will begin to blink.
To save the Auto set time and exit set-up:
Press any other button or do not press any
button for 10 seconds. The Auto indicator
will remain lit and the time display will go
back to the current time.
2
Auto
x
Auto
H
To save the current displayed time and exit
set-up: Wait for 10 seconds, or press any
button. The Auto indicator will remain lit
and the time display will go back to the
current time.
AM
PM
Auto
x
Auto
H Min
AM
PM
Min
9