Step 2: Easy Setup; Connecting To The Network - Sony BDP-S185 Operating Instructions Manual
Hide thumbs
Also See for BDP-S185:
- Operating instructions manual (56 pages) ,
- Specifications (4 pages) ,
- Service manual (105 pages)
Table of Contents
Advertisement
Connecting to your AV amplifier (receiver)
Select one of the following connection methods according to the input jacks on your AV
amplifier (receiver). When you select © or ©, make the appropriate settings in the [Audio
Settings] setup (page 16).
-► Set [BD Audio MIX Setting] (page 16).
Coaxial digital cable (not supplied)
<ZD-^-Qd>
—► Set [Dolby Digital*1] (page 16) and [DTS*2] (page 16).
cnnmim tf3
Audio/video cable
*1 Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D symbol
are trademarks of Dolby Laboratories.
2 Manufactured under license under U.S. Patent
#'s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535; 7,212,872;
7,333,929; 7,392,195; 7,272,567 & other U.S.
and worldwide patents issued & pending. DTS
and the Symbol are registered trademarks, &
DTS-HD, DTS-HD Master Audio, and the
DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All
Rights Reserved.
*3 See "Supplied accessories" (page 22).
10
Step 2: Easy Setup
When turned on for the first time
Wait for a short while before the player
turns on and starts [Easy Setup].
1
Insert two R6 (size AA) batteries by
matching the © and © ends on the
batteries to the markings inside the
battery compartment.
5 Perform [Easy Setup].
Follow the on-screen instructions to
make the basic settings using
and ENTER on the remote.
2 Plug the player into the mains.
c
1
(cf)
—to mains
4 Turn on the TV, then switch the input
selector on your TV so that the signal
from the player appears on your TV
screen.
Connecting to the
Network
Wired Setup
Use a LAN cable to connect to the LAN (100)
terminal on the player.
Internet
LAN cable
(not supplied)
ADSL modem/
Broadband
Cable modem
router
V
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.
To set the network settings
Select [Network Settings], [Internet
Settings], then [Wired Setup] (page 18), and
follow the on-screen instructions to complete
the setup.
Advertisement
Table of Contents
