Yamaha AL125 Owner's Manual page 69

3. Remove the headlight bulb cover
by pulling it off.
ZAUU0651
1. Headlight bulb cover (x 2)
4. Remove the headlight bulb sock-
et by pushing it inward and turn-
ing it counterclockwise, and then
remove the burnt-out bulb.
1
ZAUU0652
1. Headlight bulb (x 2)
PERIODIC MAINTENANCE AND ADJUSTMENT
5. Place a new bulb into position,
and then secure it with the bulb
socket.
NOTICE
If a headlight bulb of different watt-
age than recommended is used, it
may cause the battery to discharge
or affect the headlight lighting.
6. Install the panel and cowling.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Front turn signal light bulb
1. Place the motorcycle on the cen-
terstand.
2. Remove panel A and cowling A.
(See page 7-7, 7-6.)
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
7-33
ECAU0070
ZAUU0653
1. Front turn signal light bulb socket
4. Remove the burnt-out bulb by
pulling it out.
5. Insert a new bulb into the socket
by pushing it in until it stops.
NOTICE
If a turn signal light bulb of different
wattage than
used, the turn signal light flashing
may be affected.
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the panel and cowling.
1
ECAU0080
7
recommended is