Advertisement
Cassette cover installation manual
I Installation order
Assemble 4 covers A and 4 covers B as
shown in the picture.
C l i c k
C l i c k
Cover A
C o v
e r B
e r B
C o v
Take one of the 4 covers C and cut out 3
locations for assembly.
(Cut out by the groove on the assembly part.)
Cut out only 1
cover C
Assemble using cover C and D as shown
in the picture and use the provided
screws to tighten the covers. (6 locations)
Complete the assembly until the
rectangular shape is formed as shown in
the picture.
Assemble the remaining 3 covers C and 4
covers D so that they form a rectangular
shape as shown in the picture.
Do not assemble one cover C of which the assembly part
is cut out so that it can be detached.
Cover C
C o v
e r D
C o v
Set the assembled part with cover A and B,
and the assembled part with cover C and D to
the height of the indoor unit, and tighten the
screws. (8 locations)
For TN and TP, drill a hole before tightening
the screw.
Assembled part with
cover A and B
Drill a hole
before
tightening
the screw
Assembled part with
cover C and D
Check the direction of the front panel and
set the cover on the panel.
connecting wire is coming out is the same as the
location of the detachable cover.)
Direct where
the pipe is coming out
After selecting the direction you want,
make holes for pipe and drain hose to fit
the installation environment.
Cut when using
the drain hose
Direction where
the pipe is coming out
e r D
When using the pipe
Hold the front panel while keeping it
leveled to assemble the indoor unit.
(Refer to product installation manual)
Use the provided screws to assemble the
cover on the front panel. (14 locations)
(The direction the
Tighten 4 locations
Connecting wire
For TR model, drill a hole in cover C as
well.
When using the drain hose
Assemble the detachable cover C.
Tighten 4 locations
When using
the drain hose
Detachable cover
When using
the pipe
P/No.:3828A20128U
Advertisement
